![]() |
![]() |
|||
|
||||
|
|||||||
| Register | Forum Rules | FAQ | Search | Today's Posts | Mark Forums Read |
| Welcome Guest Visitor! Please Register, It's Free and Fun To Participate! | |
|
The EXTREME Overclocking Forums are a place for people to learn how to overclock and tweak their PC's components like the CPU, memory (RAM), or video card in order to gain the maximum performance out of their system. There are lots of discussions about new processors, graphics cards, cooling products, power supplies, cases, and so much more!
You are currently viewing our boards as a "guest" which gives you limited access to view most discussions. You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below. After you have registered and read the forum rules, you can check out the FAQ for more information on using the forum. We hope you enjoy your stay here! Note To Spammers: We do not allow unsolicited advertising! Spam is usually reported & deleted within minutes of it being posted, so don't waste your time (or ours)! |
|
| Please Register to Post a Reply |
|
|
Thread Tools |
|
|
#1 | ||||
|
Learning To Overclock
Regular Member
|
My temps..
2000+xp D-Tek LRWW 9800pro Maze 4 |
||||
|
|
|
|
#2 | ||||
|
Want some? lol!!!!
Senior Member
|
As long as you don't have any "snow" when gaming then you should be ok on the VC.
|
||||
|
|
|
|
#3 | ||||
|
Mad Warranty Voider
Senior Member
|
they seem a bit high to me - what are the rest of your w/cing specs - also are your cpu or gpu overclocked at all? sure the blocks are seated correctly? what thermal paste you using?
|
||||
|
|
|
|
#4 | ||||
|
Learning To Overclock
Regular Member
|
Thermochill radiator 120. two 120mm fans.
D-tek LRWW for CPU Maze 4 for GPU Eheim 1048 1/2" Tubing No additives in water (except anti-algae) Its worth pointing out that the two 120mm fans are at there lowest possible speed. I will test later with them at their highest speed to see what happens. Now at idle CPU = 41* GPU = 57* Im only using my old 2000xp till I get a new processor. My 3200xp died when I first booted yesterday. I havent decided whether to get another 3200xp or go for an athlon 64. |
||||
|
|
|
|
#5 | ||||
|
Amd power
Senior Member
|
I that 2000 a palamino cause my old used to run at riddiclous high temps
|
||||
|
|
|
|
#6 | ||||
|
Learning To Overclock
Regular Member
|
gpu now = 75* with all the eye candy up high
|
||||
|
|
|
|
#7 | ||||
|
Eldritch Angel
Senior Member
|
Max die temperature for GPU is 120c...so no, it's not too high, but you should be getting fair better temperatures under your watercooling set up.
You sure you used thermal paste? |
||||
|
|
|
|
#8 | ||||
|
Mang 4 Life
Senior Member
|
where are you reading temps?
|
||||
|
|
|
|
#9 | ||||
|
/cast self ressurect
Senior Member
|
there's a known 20șC discrepency on readings of 9800s. I believe RivaTuner reads 20șC higher than ATITool, or vice versa
|
||||
|
|
|
|
#10 | ||||
|
Learning To Overclock
Regular Member
|
How do you make the ATI tool read temps?
Im using a thermal probe. Its taped to the back of the card. The core of the chip itself I think would be hitting 80* or more. How normal is this for a WC setup? |
||||
|
|
|
|
#11 | ||||
|
/cast self ressurect
Senior Member
|
oh, man, I think it's high then
|
||||
|
|
|
|
#12 | ||||
|
Captain Teemo
Senior Member
|
hmm bit high :\ my gpu runs about no more than 45 (going by the 20degree rule... thats 65 if its wrong) and thats running my 9800XT @ 470/400
|
||||
|
|
|
|
#13 | ||||
|
Mang 4 Life
Senior Member
|
remount, use Arctic silver 5 thermal paste
|
||||
|
|
|
|
#14 | ||||
|
YouSunkMyPlanetShip!
Senior Member
|
Yeah, that does sound high...
My 9800Pro is WAY overclocked (still on air; not much longer!), and we have comparable temps with calibrated thermal diodes... I have modded my stock air cooling, but that's still not great. -BC I I III I IV FOLD@HOME! http://www.stanford.edu/group/pandegroup/folding/ |
||||
|
|
|
|
| Please Register to Post a Reply |
| Thread Tools | |
|
|