![]() |
![]() |
|||
|
||||
|
|||||||
| Register | Forum Rules | FAQ | Search | Today's Posts | Mark Forums Read |
| Welcome Guest Visitor! Please Register, It's Free and Fun To Participate! | |
|
The EXTREME Overclocking Forums are a place for people to learn how to overclock and tweak their PC's components like the CPU, memory (RAM), or video card in order to gain the maximum performance out of their system. There are lots of discussions about new processors, graphics cards, cooling products, power supplies, cases, and so much more!
You are currently viewing our boards as a "guest" which gives you limited access to view most discussions. You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below. After you have registered and read the forum rules, you can check out the FAQ for more information on using the forum. We hope you enjoy your stay here! Note To Spammers: We do not allow unsolicited advertising! Spam is usually reported & deleted within minutes of it being posted, so don't waste your time (or ours)! |
|
| Please Register to Post a Reply |
|
|
Thread Tools |
|
|
#1 | ||||
|
Area Under the Curve
Senior Member
|
I found that sometimes while using it after a while it's LED gets really dim (still visible) then it stops responding altogether for no reason. When quitting the game I find it still detects as enabled working properly under Device Man but on Control Panel the Game Controllers properties menu almost stops responding but finally loads without detecting anything except that its there and supposedly working! Mobo is DFI NF4U-D and OS XPPROSP2. I disabled "turn off to save power" for all USB devices, the only other being a HP printer (2mA) and occasionally a Lexar jump. I did notice that the Saitek appears to draw the full rated 500mA rating for the USB port but so did the prior 1 I returned Real irritating I have to quit the game unplug and plug it back in it then it suddenly works again-well for a while. The previous controller I JUST replaced was a rumble PS2-type USB 1 like the Saitek made by some company- its lower LR buttons got stuck sometimes, the right analog stick wasnt perfectly on-center, and the D-pad simply broke after a couple wks though it never once had any such non-tangible issues so I dont think its the mobos USB This is the 2nd controller in a row that is appearing to suck badly by not functioning correctly out of the box
|
||||
|
|
|
|
#2 | ||||
|
rockin the dell
Senior Member
|
uhh, ask saitek about it. there a pretty good brand. maybe they will replace it for a better model.
|
||||
|
|
|
|
#3 | ||||
|
lim(x=>oo) 1337 = me
Senior Member
|
I am using a Logitech Rumblepad 2 and so far it is working great. One problem is that although on the outside of the box it says that it will rumble in ALL EA SPORTS 2005 games, that is not true. Doesn't rumble in Madden, NBA Live, or Fifa 2005.
My old controller eventually got stuck, but so far this one is great. |
||||
|
|
|
|
#4 | ||||
|
Bourgeois
Senior Member
|
Quote:
Yeah Logitech kick ***... THeir cheap controller kick *** for the $$ |
||||
|
|
|
|
#5 | ||||
|
Need $ for New Rig
Senior Member
|
I personally love my x-box controller. It was REALLY easy to make the converter myself and all the buttons work in most games with the drivers someone made for it.
|
||||
|
|
|
|
#6 | ||||
|
Staring into souls
Senior Member
|
I use a gc controller with a converter, man that thing is quality. Very accurate and definetly no issues what so ever. I would highly recommend it, much better than any pc controller I have ever used.
|
||||
|
|
|
|
#7 | ||||
|
Running System Stock
Forum Newbie
Posts: 14
Last Seen: 03-27-2007
Age: 28
|
I use a XBOX Controller and with the drivers it works awesome...although im haveing alittle bit of trouble using the rumble features.
|
||||
|
|
|
|
#8 | ||||
|
Learning To Overclock
Senior Member
|
I have bought a couple of them and they both broke on me
|
||||
|
|
|
|
#9 | ||||
|
Overclocker
Senior Member
|
You should get the logic 3 rumble pad, awesome, pad, its exactly like the PS2 pad but for the PC.
Also its very cheap i've had it nealy a year no problems at all, works on every game. Trust me awesome pad, you wont be dissapointed. |
||||
|
|
|
|
#10 | ||||
|
Hey!
Senior Member
|
i have the nyko ariflow ex. it is just like my airflow for my ps2. works great. but there isn't any runble. only downfall i have so far with it.
|
||||
|
|
|
|
| Please Register to Post a Reply |
| Thread Tools | |
|
|