![]() |
![]() |
|||
|
||||
|
|||||||
| Register | Forum Rules | FAQ | Search | Today's Posts | Mark Forums Read |
| Welcome Guest Visitor! Please Register, It's Free and Fun To Participate! | |
|
The EXTREME Overclocking Forums are a place for people to learn how to overclock and tweak their PC's components like the CPU, memory (RAM), or video card in order to gain the maximum performance out of their system. There are lots of discussions about new processors, graphics cards, cooling products, power supplies, cases, and so much more!
You are currently viewing our boards as a "guest" which gives you limited access to view most discussions. You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below. After you have registered and read the forum rules, you can check out the FAQ for more information on using the forum. We hope you enjoy your stay here! Note To Spammers: We do not allow unsolicited advertising! Spam is usually reported & deleted within minutes of it being posted, so don't waste your time (or ours)! |
|
| Please Register to Post a Reply |
|
|
Thread Tools |
|
|
#1 | ||||
|
Ninja Penguin
Senior Member
|
GPU Folder added
|
||||
|
|
|
|
#2 | ||||
|
Westminster reject
Senior Member
|
|
||||
|
|
|
|
#3 | ||||
|
Ninja Penguin
Senior Member
|
Well, they jumped the gun saying in the FAQ thinking 7.1 would make everything right. Use the Catalyst 6.5 and ONLY Catalyst 6.5, I got two EUE's faster than I could shut it down with the Catalyst 7.1 drivers, GPU init failure. It's turning in 330 pt GPU WU's every 18 hours or so, running very stable with Win2KSP4 on a Shuttle SN21 with A64 3700 @ 2.5GHz. The wimp 250W PS in the Shuttle seems to be able to take it just fine, 12V rail is 12.24V with a DVM. I got the X1900GT because everything faster/bigger is doublewide, and the Shuttle's PCIe is on the outside so it can only take a singlewide card.
EDIT: Has anyone tried running a normal CPU client alongside the GPU client, with the GPU client at slightly higher priority? I may give that a shot and see how it works out. Last edited by Rhiyddun : 01-14-2007 at 02:35 PM. Reason: update with question |
||||
|
|
|
|
#4 | ||||
|
Running System Stock
Forum Newbie
Posts: 1
Last Seen: 01-26-2007
|
I am running an E6300 with an x1900gt getting similar results. The E6300 turns in ~375 to 396 every three days or so and the x1900gt does 330 every 18-21 hours (usually 2x18 hrs followed by a 21 hrs). Think it is just the timing of the stats page updates. Between the two instances my machine runs at 100% on both cores 24/7 in Windows XP Pro.
|
||||
|
|
|
|
#5 | ||||
|
mo' frozn foldin'
Senior Member
|
As long as you've got a dual core system, you should be able to feed the GPU with 1 core and use the other for the standard client.
|
||||
|
|
|
|
#6 | ||||
|
Mad Warranty Voider
Senior Member
|
I think I'm getting more points now that I have one core 100%, the other at 70%, and the GPU running then just running one CPU and GPU. Before just running one CPU and one GPU CPU usage was 100%.
|
||||
|
|
|
|
#7 | ||||
|
mo' frozn foldin'
Senior Member
|
If you can find some happy medium that gets you the best ppd, let us know. I've seen some other posts like yours.
|
||||
|
|
|
|
#8 | ||||
|
Ninja Penguin
Senior Member
|
Well, when I get back home tomorrow night, I should have the parts to put an Opty 165 system together, but I'm going to load x86_64 linux on it, and I'm not about to waste a perfectly good Opteron on a scrawny 250W PS box like the Shuttle, so the GPU will be a single processor box for the foreseeable future. Sounds like I might be able to squeeze a few extra PPD running a CPU folder at 20-40% while the GPU client is running, hardly seems worth the points loss tweaking it would involve.
|
||||
|
|
|
|
#9 | ||||
|
Mad Warranty Voider
Senior Member
|
I'm thinking about RMAing my 7900GT for an x19xx series but the ATI cards are sooo freakin long it'll block the CPU cooling intake on my SD31P!
|
||||
|
|
|
|
#10 | ||||
|
Ninja Penguin
Senior Member
|
The X1900GT is single wide, and wasn't really any longer than the 6800GT that I had in there. Your SD31 isn't any smaller than my SN21...
|
||||
|
|
|
|
#11 | ||||
|
Learning To Overclock
Regular Member
|
I just got the gpu client up as well: 1950pro running around 8:05 a frame on the 330s. Setup was fantastically easy too (download client, open client, it's off and running.) This is better than I expected, since the pro is a stunted card. Cat 6.11 drivers, if anyone cares. I think it's completed 5 wu since I started it, no errors yet. I'm pretty happy, i guess.
|
||||
|
|
|
|
#12 | ||||
|
Ninja Penguin
Senior Member
|
Good going, and welcome! If you haven't, go to the CP and set up your folding name to get your "carbon ring" red folding icon. I had an odd one, Catalyst threw up a box saying it had reset the craphics card because it wasn't accepting commands, which interrupted the GPU folding. This is after about a week of continuous folding, don't know if it will be a regular thing or if it's a glitch.
|
||||
|
|
|
|
| Please Register to Post a Reply |
| Thread Tools | |
|
|