Bench wPrime Today

[linuxfan2000]

Originally Posted by eligray

dang, a refrigeration hose sprung a leak last night. Rendered the chiller unsafe to use (couldn't monitor high side pressures), so I had to shut the rig down before I got to try for a 6Ghz wPrime

YAY I get to keep #1 in Wprime with two cores for a few days more!
Thats too bad, hope you get it up and running again soon!

[Witchdoctor]

Updated

Sick clocks on the Phenom Tim nice job


That is a bummer Eligray ..... hope your back up and running soon

[TwistedDane]

32M --- TwistedDane --- 43.544 - E6850 - 3790 @ 474x8 - 2x2gb Kingston HyperX 533 - 474 CL6-6-6-18 2T - WATER

1024M --- TwistedDane --- 1391.128 - E6850 - 3790 @ 474x8 - 2x2gb Kingston HyperX 533 - 474 CL6-6-6-18 2T - WATER

This is my 24/7 setup with a bit relaxed timings and clocks. Perhaps i should try @ 3900 6-5-5-14 2t


It should be okay now

[Witchdoctor]

Nice work Twisted ... please resubmit ver. 1.55

see first post for link



Kid tested Bot rapage approved ........

[linuxfan2000]

Thinking about that Pentium 4 CPU I have... its supports HT so runs with two cores....
Could I disable the HT and run for the single core rankings?
I don't think HT even makes much difference on this CPU... Looks like 5ghz is around 50s in Wprime 32M....
Here's the CPU: http://hwbot.org/hardware/processor/pentium_4_524
If that will not work I guess I need to get a single core for the rankings...

[TwistedDane]

Originally Posted by Witchdoctor

Nice work Twisted ... please resubmit ver. 1.55

see first post for link



Kid tested Bot rapage approved ........

Done That did make a BIG diff

[Witchdoctor]

Did you go under advanced options and set it up for two threads ..... ?

[linuxfan2000]

Originally Posted by Witchdoctor

Did you go under advanced options and set it up for two threads ..... ?

you beat me to it!
Your score should be the same + or- a few thousands of a second between versions....
you need to set the thread count, this older version doesn't automatically detect them...

[TwistedDane]

Originally Posted by Witchdoctor

Did you go under advanced options and set it up for two threads ..... ?

If it was me who you asked. Then Yes i did set it to 2 Threads

I really think its a bit too slow my 1024 ?

[Mr.Scott]

32M:
Mr.Scott --- 54.625 sec - Opty 148 - 3103mhz @ 310x10 - OCZ Plats - 259 2.5-3-2-5 1T - H2O
1024M:
Mr.Scott --- 1748.234 sec - Opty 148 - 3103mhz @ 310x10 - OCZ Plats - 259 2.5-3-2-5 1T - H2O

[Witchdoctor]

Updated

Does not seem right there twisted I would try it again

Mr Scott no sceen shots ??

Thanks for posting guys

[FX5200]

Updated run with my E5200 @ 3.9Ghz coming soon...

Just need a couple of days to get back home

[Mr.Scott]

Mr Scott no sceen shots ??

Added.........I forgot. Sucks to get old.

[Witchdoctor]

Updated

Nice work Mr Scott same memory .....

FX Looking forward to it .... bring it on ...
Unfortunatly I am in the middle of a build right now but hope to come back a bit stronger

Mr Scott question if you don't mind. I consider you and your teammates the best of the best with the type of hardware you are using. I always loved the AMD products back in the day...
I am resurecting an old 939 system for a few reasons

1. X3 Classic catagory
2. Single threaded Prime runs for this thread
3. To try and take some bionts away from CP.............
4. And most of all just for the fun of it .......

Anyway I have some old XMS 4400 550 Mhz sticks 2.5-4-4-8
How would you rate this memory ? and do you think it is viable to be competetive with these stix .....

Thanks

[Mr.Scott]

I consider you and your teammates the best of the best with the type of hardware you are using.

You're too kind. I'll be sure to pass along the compliment.

Anyway I have some old XMS 4400 550 Mhz sticks 2.5-4-4-8
How would you rate this memory ? and do you think it is viable to be competetive with these stix .....

There's always a way to be competitive with any hardware. Sometimes it's just a little more difficult and time consuming. My opinion on that ram, TCCD on a Brainpower PCB, at DDR550 (the rated spec).... it's overrated. You won't get much higher than the 550 and the timings are just a little loose for good PI and Pifast runs. You can tighten the timings slightly, but you lose speed and bandwidth fast. Voltage over 2.8v won't help either. I had a set of those a while ago. I was less than impressed. I did alot better on my Plats with a 2-3-2-x @ over 520. My suggestion, FWIW, find sticks with a CAS of 2 that run fast with voltage......or, it's tough to beat good 'ol BH-5 @ 2-2-2-x if you can get the volts to them.

[Witchdoctor]

Thanks for the insight.... I was neve impressed to much with them back when they were new ..... I will probably give them a go and see if I can get some tighter one in the FS thread at a decent price


Thanks again Mr Scott I appreciate the help .....

[Mr.Scott]

Anytime my friend.

[travy25]

The plats are the way to go. He talked me into getting some and he was right, they are OC beasts. They are in the FS thread atm.