How long before we hit 2 million in a day?

[Maniac]

Originally Posted by slider11

wu finished sending failed. it wont connect to the server. probably due to the internet speed here.

Internet speed shouldn't affect the initial connection...

[slider11]

I'll post the log here in a bit.

Additional Comment:

[02:29:09] + Attempting to send results [April 15 02:29:09 UTC]
[04:29:19] - Couldn't send HTTP request to server
[04:29:19] + Could not connect to Work Server (results)
[04:29:19] (130.237.232.237:8080)
[04:29:19] + Retrying using alternative port
[06:29:21] - Couldn't send HTTP request to server
[06:29:21] + Could not connect to Work Server (results)
[06:29:21] (130.237.232.237:80)
[06:29:21] - Error: Could not transmit unit 01 (completed April 14) to work server.
[06:29:21] Keeping unit 01 in queue.
[06:29:21] - Preparing to get new work unit...
[06:29:21] Cleaning up work directory
[06:29:21] + Attempting to get work packet
[06:29:21] Passkey found
[06:29:21] - Connecting to assignment server
[06:29:25] - Successful: assigned to (130.237.232.237).
[06:29:25] + News From Folding@Home: Welcome to Folding@Home
[06:29:25] Loaded queue successfully.
[06:49:52] Project: 6903 (Run 0, Clone 29, Gen 12)


[06:49:52] + Attempting to send results [April 15 06:49:52 UTC]
[08:50:01] - Couldn't send HTTP request to server
[08:50:01] + Could not connect to Work Server (results)
[08:50:01] (130.237.232.237:8080)
[08:50:01] + Retrying using alternative port

[jimh425]

Thanks jmossman.

I don't know much about connection problems, but this faq suggests it could be a server down problem. http://fahwiki.net/index.php/Debuggi...to_FAH_servers

[slider11]

im on 130.237.232.237:8080

here are its stats
130.237.232.237classicfolding-2-acceptAccepting0.10190-116151610885885885----90--1-

[jmossman]

Only time I had a problem like this was when using Langouste Decouplar. Still not sure why it happened but every WU finished and had the same connection problems in your log. This was on the test system I used to learn Ubuntu on just before I built the 2p, so was a 2600k. I didn't know anything about linux, so didn't know how to uninstall it. I simply wiped the HDD and reinstalled Ubuntu and left out Langouste and never had the problem again. Other than that I can't think of anything.

[slider11]

im not running langouste so

[BIOShazard]

Started putting my 100k in the mix about a week ago. Should rise further once I get the cluster up though.

[slider11]

i think ive came to a point where im just gonna fold and fold and fold without being able to send the results then take the comp to a buddys house and just upload like 100 bigadv wu's. we will have um well over 2mil ppd then

[jimh425]

My WU just finished, but I'm not sure if it counts on Today's. If not, Today, we should break 2M tomorrow.

slider11, I hope you can figure out why you aren't uploading. For sure, the bigger wu take a lot longer to upload. Mine can take 45 minutes or so with a fast internet connection.

Additional Comment:

On goes the neverending saga...on the plus side, my office has two circuits. Unfortunately, the other circuit is shared with our bathroom. My wife's flat iron, and two 4ps are apparently too much. So, one of my 4p's was off for a few hours until I got home. No loss of unit, but lost time, so 2M will probably have to wait for another day.

There's always tomorrow.

[lord_adrick]

Are we there yet?

[jimh425]

Looks like we made it.

04.19.122,209,062262

[jmossman]

Perfect timing too cause I just lost my last unit at 98% today lol. First one to have that happen so far on the 4p other than ones I caused myself.