EXTREME Overclocking Forums
Home | Reviews | Forums | Downloads | RealTime Pricing Engine | Folding Stats Contact Us


Go Back   EXTREME Overclocking Forums > General CPU Cooling > Phase Change, Dry Ice, LN2, Other Crazy Stuff

Welcome Guest Visitor! Please Register, It's Free and Fun To Participate!
The EXTREME Overclocking Forums are a place for people to learn how to overclock and tweak their PC's components like the CPU, memory (RAM), or video card in order to gain the maximum performance out of their system. There are lots of discussions about new processors, graphics cards, cooling products, power supplies, cases, and so much more!

You are currently viewing our boards as a "guest" which gives you limited access to view most discussions. You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below.

After you have registered and read the forum rules, you can check out the FAQ for more information on using the forum. We hope you enjoy your stay here!

Note To Spammers: We do not allow unsolicited advertising! Spam is usually reported & deleted within minutes of it being posted, so don't waste your time (or ours)!


Please Register to Post a Reply
 
Thread Tools
Old 05-20-2013, 02:32 PM   #1
jbragg77
Running System Stock
Forum Newbie
 
Posts: 1
Last Seen: 06-03-2013
options for cooling the condenser

This is my first post on this forum so i hope i following the rules.

I am planning on building a custom enclosure, perhaps 3 feet wide by 5 tall to resemble a 1960 era main frame, I plan on using an arduino controller to do the "tos star trek" light array and control the spinning reel to reel.

I have a questions in regard to modifying a ac unit for a water chiller :

1. I have easy access to a 55 gallon barrel outside with a solar powered fan on top, i was thinking i could immerse the condenser in a small cooler like the evaporator and use a pump to exchange water with the large outside reservoir. is there any issue with doing this? advantage or disadvantage.

Last edited by jbragg77; 05-20-2013 at 05:02 PM.
United States  Offline
    Register to Reply to This Post
Old 05-22-2013, 02:26 AM   #2
Drewmeister
The Need 2 Freeze
Drewmeister's Avatar
Senior Member
 
Posts: 2,455
Last Seen: Today
Age: 52
From: Phobos Lab
iTrader: 22 / 96%
Hello jbragg77,

A liquid cooled condenser can provide higher capacity, steady and adjustable head pressure and obviously it's easy to transfer the heat out of the room via 1/2" tubing.

Issues you may encounter:

1. Galvanic corrosion. You must run multi metal coolant.

2. Heat rejection of barrel. It must be able to keep up with the total heat of rejection from the chiller. If barrel temp exceeds ambient then you'll need to add a radiator.

3. Expense and complexity. In addition to the reservoir, tubing, coolant and extra pump, you'll need a way to keep the barrel at a fairly steady temperature in all climates. A thermostat can cycle the fan to keep temps in range in the warmer months. If it get's really cold where you are then you may have to insulate the barrel or just bypass it through a small radiator during the colder months.

4. Pump failure can be disastrous. Make sure to incorporate a thermal shutdown for the chiller and pc.

Sounds like a cool project.

Welcome to EOCF!
United States  Offline
    Register to Reply to This Post
Sponsored Links:
Please Register to Post a Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 02:45 PM.

Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Powered by vBulletin
Copyright ©2000 - 2016, EXTREME Overclocking