Problems...

[Mosha]

Is it supposed to say this much when it starts up? I just checked mine and it doesnt say any of that...

[14:09:08] - Ask before connecting: No
[14:09:08] - Use IE connection settings: Yes
[14:09:08] - User name: Mosha (Team 11314)
[14:09:08] - User ID: 271385D14208E8F
[14:09:08] - Machine ID: 1
[14:09:08]
[14:09:08] Loaded queue successfully.
[14:09:08] + Benchmarking ...
[14:09:12]
[14:09:12] + Processing work unit
[14:09:12] Core required: FahCore_65.exe
[14:09:12] Core found.
[14:09:12] Working on Unit 03 [October 3 14:09:12]
[14:09:12] + Working ...
[14:09:13] Folding@Home Client Core Version 2.53 (June 29, 2004)
[14:09:13]
[14:09:13] Proj: work/wudata_03
[14:09:14] Done: 15895 -> 124800 (decompressed 785.1 percent)
[14:09:14] nsteps: 10000000 dt: 2.000000 dt_dump: 1000.000000 temperature: 296.000000
[14:09:14] xyzfile:
[14:09:14] " 113 p1103_Kiefhaber_4
[14:09:14] 1 CA 107.036059 -99.854222 58.969713 214 ..."
[14:09:14] keyfile:
[14:09:14] "parameters ./Kiefhaber.prm
[14:09:14] NOVERSION
[14:09:14] ARCHIVE
[14:09:14]
[14:09:14] cutoff 16.0
[14:09:14] taper 1..."
[14:09:14]
[14:09:14] Hashes matched on file work/wudata_03.dyn
[14:09:16] Header on frame 9 differs from expected header
[14:09:16] Got: 12044F-110024-415FA8C8-36B841F3: 0009
[14:09:16] Expected: 12044F-110024-415FA8C8-36B841F3: 0008
[14:09:16] Starting from initial work packet
[14:09:16]
[14:09:16] Protein: p1103_Kiefhaber_4
[14:09:16] - Run: 18 (Clone 36, Gen 17)
[14:09:16] - Frames Completed: 0, Remaining: 200
[14:09:16] - Dynamic steps required: 10000000
[14:09:16]
[14:09:16] Writing local files:
[14:09:16]
[14:09:16] parameters work/wudata_03.prm
[14:09:16] - Writing "work/wudata_03.key": (overwrite) successful.
[14:09:17] - Writing "work/wudata_03.xyz": (overwrite) successful.
[14:09:17] - Writing "work/wudata_03.prm": (overwrite) successful.
[14:09:18] - Writing "work/wudata_03.key": (append) successful.
[14:09:18]
[14:09:18] PROJECT="work/wudata_03", NSTEPS=10000000, DT=2.0000, DTDUMP=100.000000, TEMP=296.00
[14:09:19] TINKER: Software Tools for Molecular Design
[14:09:19] Version 3.8 October 2000
[14:09:19] Copyright (c) Jay William Ponder 1990-2000
[14:09:19] portions Copyright (c) Michael Shirts 2001
[14:09:19] portions Copyright (c) Vijay S Pande 2001

This one is weird:

[07:53:53] Finished a frame (92)
[08:09:26] Finished a frame (93)
[08:25:00] Finished a frame (94)
[08:40:33] Finished a frame (95)
[08:56:08] Finished a frame (96)
[09:11:39] Finished a frame (97)
[09:27:07] Finished a frame (98)
[09:42:42] Finished a frame (99)
[09:58:14] Finished a frame (100)
[09:58:14] TINKER is Exiting following Normal Termination
[09:58:14]
[09:58:14] Finished Work Unit:
[09:58:14] VerifyARCFile: Checksums don't match (frame 1). Failed verification
[09:58:14] Error: ARC file integrity could not be confirmed. Exiting
[09:58:14]
[09:58:14] Folding@home Core Shutdown: BAD_FRAME_CHECKSUM

It finishes the Tinker and then the core shuts down and it says BAD_FRAME_CHECHSUM thing.

There is something going on! If I get this rig up I can launch back to 300+

[MRXor]

Yeah, help us!

[HotRod]

Realy need to see what Protien you were working on,
If it is the one in this post then the P1103 is a 200 frame tinker. Therefore it didnt finish the WU, It stoped at 100 frames complete.

It look like a bad core to me. Keep a eye on the next WU and see what happens

[Mosha]

So should I just reinstall the whole thing to make my life easier?

[MRXor]

could someone please help me out, all this trouble is my folding!

i need to get back folding so we have more points and cure diseases!

i wanna

[Jason]

It probably wouldn't hurt...

Easiest thing to do is just delete all the files/sub directories except for the main FAH executable, and the .cfg file. Then when you start it back up it will download a new protien and FAH core.

Originally Posted by Mosha

So should I just reinstall the whole thing to make my life easier?

[MRXor]

Okay, I will do that myself, thanks for the help Jason.

[MRXor]

Update:
I reinstalled everything, when I come back on sunday (will be gona for three days to belgium) I will see if everything is fine..

[ViperX883]

Alright, keep it up fellas. You guys are representing OC'ing.com... don't forget that!!!!

[MRXor]

Originally Posted by ViperX883

Alright, keep it up fellas. You guys are representing OC'ing.com... don't forget that!!!!

Yup Viper we will, anyways everything seems fine so far, its folding along nicely!! .