G.Skill 2GBHZ 2x1GB Sticks Are Nice!

[stealth17]

After running into a ton of problems with the Crucial Ballistix 2x1gb kits (as many others), I've gotten some G.Skill 2x1gb HZ DIMMs to use.

Just got them in tonight and did a little playing. I have definatly not pushed these to the max yet. All I did was put them in and boot.

These are looking very promising!



2.58v for these results.

More to come!

-Jordan

[jmilch]

Originally Posted by stealth17

After running into a ton of problems with the Crucial Ballistix 2x1gb kits (as many others), I've gotten some G.Skill 2x1gb HZ DIMMs to use.

Just got them in tonight and did a little playing. I have definatly not pushed these to the max yet. All I did was put them in and boot.

These are looking very promising!



2.58v for these results.

More to come!

-Jordan

Welcome aboard, they are very nice. I have them and am in love

[SaFrOuT]

ya G.Skill is the best bang for buck

and very nice fsb u got there dude

can u aim for FSB 300

[jmilch]

Originally Posted by SaFrOuT

ya G.Skill is the best bang for buck

and very nice fsb u got there dude

can u aim for FSB 300

who me?????

[ccie]

I ordered these yesterday so they shoud arriving today.

Can't wait, my Corsair XMS Pro just don't cut the mustard.

[SaFrOuT]

Originally Posted by jmilcher

who me?????

no i am talking to the thread starter who was abel to achive 285 @ less than 2.6vram without even burn-in

[Zith]

I have a pair of these arriving today to replace my OCZ gold 2x512.. I can't wait to go to 2gb, and move my divider back to 1:1

[stealth17]

Here is some 32m for you.





Im trying to get 290mhz stable at 2.58v still.

[Vrenex]

I have a pair of these myself, really nice ram.

[stealth17]

Got some more testing done.

32m stable





http://valid.x86-secret.com/show_oc?id=73010

Still at 2.58v

[XFxGeforced]

****, nice job. I was one of the unfortunate who bought the zx right before they started to become horrible. It started when they shipped and one of the sticks was actually dead, then i had to rma it, and i can get like 250 out of them but thats about it, and not past liek 240 1:1 at x11 multi

[SaFrOuT]

is this 2.58 by choosing 2.5 in the bos and enabling the 0.03 option

[jmilch]

Originally Posted by ccie

I ordered these yesterday so they shoud arriving today.

Can't wait, my Corsair XMS Pro just don't cut the mustard.

Corsair , you just bought the name, not quality

[magg]

**** Stealth, that's pretty impressive. The CPU running on DD-X still? Those volts don't seem enough to require such heavy cooling

[stealth17]

Here is some 12 hour prime action too!

Originally Posted by SaFrOuT

is this 2.58 by choosing 2.5 in the bos and enabling the 0.03 option

I choose 2.5v in bios. I have a vdimm mod too which I have to pot as low as it will go. It still adds just a little voltage though. I measure 2.58v with my DMM.

Originally Posted by magg

**** Stealth, that's pretty impressive. The CPU running on DD-X still? Those volts don't seem enough to require such heavy cooling

Thx mate

Yeh, still on the DD-X atm. Dont really need it your right but just for playing around with the ram its not worth it to unmount the DD-X and stuff. Plus I run the DD-X 24/7 and have my cpu at 280x12=3360mhz 1.64v

Its a nice 24/7 to say the least! I may bump up to 285x12=3420 and stabilize that for a 24/7 now that I know my ram is willing.

[Zith]

I got my ram and am really liking it. I got some errors in memtest test #8 at 265mhz (2.7v), so I dropped it down to 260mhz and it's running like a champ. Going to tweak it out a bit more when I have some time, but so far it's a ton faster than my old stuff.

[op1e]

Just a quick question, I stumbled across this review and was wondering if this were true. It says the HZ GSKILL 4000 chips are the same as my HS 3200. The review says they loosened up the timings to the same as the ddr500 and upped the voltage and got 272 with 2.8v. One thing I noticed is the numbers are different in the review than what I got off of newegg. The review says F-1 3200USU2 and F1-4000USU2, but what I have and whats out on the egg now says F1 3200USU1 and F1 4000USU1. Still the same chips respectively?

[jmilch]

Just thought I would say special thanks to Stealth, your timings were extremely helpful to me.

I was mixed up, and couldnt find any real screenshots like yours, thanks a bunch!

[General Zod]

Great job Stealth,impressive oc'ing as usual.
Although the site the pix are hosted on are exremely slow,please load them to eoc next time.

Also,can you link us to the ram your using I think this will be my next ram .

[Cedar]

SOme great OC's there. What cooling is that?