Post your *RETAIL* Conroe/Allendale Overclocks

[skilltim]

ok, thanks.

What about VCore, the guy I bought my E6300 off said it could go up to 2.8GHz on default volts. Also, what is FSB Termination Voltage? The manual doesn't help much.

[FireFly]

Not sure what FSB termination voltage is, you'd have to wait for a response from someone else.

[mesce]

You know, I haven't an idea what it actually does, I would of thought it terminated the fsb voltage (i.e. MCH) at 1.5V but that would be silly. The higher it is the better it is for overclocks, that much I do know.

[capitan182]

Originally Posted by skilltim;

I'm getting errors in Windows XP at FSB>356MHz. I'm using my sig. It's not my RAM timings. Here are the BIOS settings, please advise.

CPU Frequency 356Mhz
PCI-E Frequency Auto, 90-150MHz
PCI Clock Sync Auto or 33.33MHz
Memory Voltage Auto, 1.8V-2.1V
CPU VCore Voltage Auto, 1.3V-1.9V
FSB Termination Voltage Auto, 1.2V or 1.3V

What is the default PCI-E Frequency? I'm thinking 90, 100 or 133MHz.
I probably need to lock PCI to 33.33MHz.
Is Corsair XMS2 ok up to 2.1V?
What CPU VCore are people setting between 350-400FSB?
What is FSB Termination Voltage? is it NB voltage?

Any suggestions on this would be greatly welcomed.

i have the same ram as you and i have had it at 2.2 with out any problems
and i still cant get around the 330 wall are there any boards out that can do it?

[AkXb70]

max the fsb termination voltage and mch voltage when pushing the p5w, itl help alot

[capitan182]

how do i get my FSB: DRAM from 3:4 down to 1:1? or is 3:4 good?

max the fsb termination voltage and mch voltage when pushing the p5w, itl help alot

i tryed that and got nothing better then befor, it post but then i get windows errors

[ustorfixx]

whats v-core set at now with the others maxed?

[capitan182]

i have not changed it, its at auto

i have been messing around with the vcore and this is what i have got my 6700 up to stable, i got it to post a 3.75 but it was not stable

[AruisDante]

if your voltage is really only 1.16 volts, you've got yourself a hell of a chip. Up that to around 1.45, and you should see a really big inprovment in clockspeeds.

[FireFly]

Mine will arrive next week, but I still need to pick some RAM and get half the stuff ordered! ****it!

[AkXb70]

Originally Posted by AruisDante

if your voltage is really only 1.16 volts, you've got yourself a hell of a chip. Up that to around 1.45, and you should see a really big inprovment in clockspeeds.

speedfan shows it at 1.46...i'm guessing that cpu-z is wrong

[AruisDante]

whoops, missed that

still, bump it to 1.5 and see what happens.

[AkXb70]

Arius, what do you think is the max safe 24/7 for conroe?? ive seen people run some crazy volts through these things and none have died....yet

i havnt put much of anything over stock into mine

[sladesurfer]

Here she is

[burn what?]

what mb are u using with that fsb slade?

[edfx21]

Originally Posted by AkXb70

Arius, what do you think is the max safe 24/7 for conroe?? ive seen people run some crazy volts through these things and none have died....yet

i havnt put much of anything over stock into mine

What air cooling you use? 1.45 Should be ok so the cpu could last like 5-8 years. I use 1.52 actual 1.55vcore set in bios for 24/7 use. Dont care if this 6400 will last less then 3 years But temps are a bit high with this vcore Asus probe reports 60c idle and 72C load with Shte ninja. Some how i think its bull since it only raises 12c from idle to load. Did you try 1.6Vcore yet AK? For few min it should be fine.

[AkXb70]

i'm not on air...i'm on water, TDX block, enhiem pump, triple 120mm rad

asus probe shows 35ish C load at 3.15GHz 1.375v

highest vcore i tried was 1.475v and i could run 01 at 3.42GHz but not 05

[edfx21]

Water? Pump that Vcore up to 1.6

[AkXb70]

after stargate tonight i'll be doing nothing but o/cing on both my celeron rig AND my E6600 rig

[AruisDante]

*chuckles* yeah, I don't tihnk i'd go as high as 1.6 for 24/7... this is a 65nm chip after all. But 1.55 seems to be pritty safe, so see what you can get with that, and then go to 1.6 for your bench runs.