![]() |
![]() |
|||
|
||||
|
|||||||
| Register | Forum Rules | FAQ | Search | Today's Posts | Mark Forums Read |
| Welcome Guest Visitor! Please Register, It's Free and Fun To Participate! | |
|
The EXTREME Overclocking Forums are a place for people to learn how to overclock and tweak their PC's components like the CPU, memory (RAM), or video card in order to gain the maximum performance out of their system. There are lots of discussions about new processors, graphics cards, cooling products, power supplies, cases, and so much more!
You are currently viewing our boards as a "guest" which gives you limited access to view most discussions. You need to register before you can post: click the register link to proceed. Before you register, please read the forum rules. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload your own pictures, and access many other special features. Registration is fast, simple, and absolutely free! To start viewing messages, select the forum that you want to visit from the selection below. After you have registered and read the forum rules, you can check out the FAQ for more information on using the forum. We hope you enjoy your stay here! Note To Spammers: We do not allow unsolicited advertising! Spam is usually reported & deleted within minutes of it being posted, so don't waste your time (or ours)! |
|
| Please Register to Post a Reply |
|
|
Thread Tools |
|
|
#1 | ||||
|
Running System Stock
Forum Newbie
Posts: 23
Last Seen: 02-06-2008
Age: 26
|
Help with ASUS A7N8X
![]() i was helping out a friend overclock he xp2500+ but we had to reset the bios and it's been crashing since, i was wondering if any 1 has the settings for the bios that would work(overclocked or not). thank you in advance |
||||
|
|
|
|
#2 | ||||
|
EOCF Elder
Administrator
|
What has been crashing ever since? Windows? If so, just re-install Windows as the OS probably became jacked when it noticed the speed change.
|
||||
|
|
|
|
#3 | ||||
|
Running System Stock
Forum Newbie
Posts: 4
Last Seen: 06-28-2007
|
try clearing cmos
it will be under Clear RTC RAM in the manual if you don't have the manual ASUS website has it I would give you the settings but I cooked this broad in a drunken hard drive incident last year |
||||
|
|
|
|
#4 | ||||
|
Running System Stock
Forum Newbie
Posts: 23
Last Seen: 02-06-2008
Age: 26
|
thanks guys for the help, both of you, but my problem is complicated. I have reseted the bios....that gives me 100(default) x11 (multi for cpu). this setting works but only produces 1100mhz, i have goten it to 133x11 for ~1460mhz. I must be missing something in the bios because 166x11(stock) doesnt work. it shows the bios, the cpu, counts the ram and stops. The next thing that should show would be the ram speed in mhz but never gets that far.
the chipset (Nforce2 is good for 400mhz) and the ram ( 1 stick of samsung ddr3200) both are rated for more than what i'm acheving. I know its not a ram compatibilty issue because it was working before up to a FBS of 195. I'm stumped, if its not to much troble could some one screen shot there bios settings with your bios version, much appereciated |
||||
|
|
|
|
#5 | ||||
|
procrastinator
Senior Member
|
do google search for trats modded bios they work really well for ocing that board,well mine anyways
|
||||
|
|
|
|
| Please Register to Post a Reply |
| Thread Tools | |
|
|