New GPU Units?

Maniac · 02-21-2012, 02:20 PM

I woke up this morning and noticed my GPU fan was at 100% (normally around 92%, it sounded like a jet plane). I checked GPU-Z and my temps were at 82C, then I checked HFM and my GPU was putting out over 20K PPD on a P8031. Normally it does between 14-16K.

I actually had to back off my GPU overclock because my UPS started beeping as it only supports a max draw of 600 watts... my system was pulling that much power at the wall. After backing off the overclock I'm about 19.5K PPD on the GPU.

These new units seem to use the GPU very efficiently... hence drawing more power and causing more heat

jmossman · 02-21-2012, 02:28 PM

Lol just literally posted a comment about this 2 minutes ago. Yeah they are niiiice. Completed 4 now.

Maniac · 02-21-2012, 03:15 PM

Quote:

Originally Posted by jmossman

Lol just literally posted a comment about this 2 minutes ago. Yeah they are niiiice. Completed 4 now.

Yeah I saw some in another thread. Also, it seems to use less CPU than the previous units did, my PPD on my cpu has gone up 1-2K as well. Right now my system is doing ~35K PPD...

Overvoltage · 02-21-2012, 03:39 PM

I have been doing these units for a few days, slowly doing them. I had to back off my voltages and overclock to keep the fan noise reasonable while maintaining 91C on the GPU and underclock the memory a few hundred MHz. The previous units only ran at 82 C with 50 Mhz more on the core and more voltage too.
If I get my connection to the servers straightened out I'll be happy to work on these units.

_MtM_ · 02-21-2012, 03:54 PM

Not one of you having issues with more desktop lag?

Edit: you are talking about these right? -> http://foldingforum.org/viewtopic.php?p=208672#p208672

jmossman · 02-21-2012, 04:00 PM

Yup those are the WUs. Haven't noticed any lag here.

_MtM_ · 02-21-2012, 04:02 PM

Ok, saw some complaints. Might be lower grade fermi's having more trouble running both screen updates and protein simulations ( you don't run low grade

).

Overvoltage · 02-21-2012, 04:03 PM

Yeah the new GPU units. I've been running them a week They are nice but they put a bigger load on the GPU. Got one going now.

http://picturepush.com/host.php?image=7630722

No lag on the desktop etc. I can play most of my games while they are still folding.

_MtM_ · 02-21-2012, 04:14 PM

OverVoltage, are you a member or are you running betateam flag without being a member? If so, that means I won't help you in the future unless I see logs showing you're not running the flag. Not because I'm a ****, but because beta team is get's official support, on the support forums, they have their own section. People willing to run the flag should sign up so they can give feedback on work units when they feel something is in the miss ( or not, at times ). It's a good place, I'm not in the position to contribute since my range of hw doesn't cover anything currently running in beta phase, but I can tell you the feedback is appreciated and it's also being listened to.

Also, you might have found the ONLY wu's which are coming out of beta which are giving a higher ppd then regular work units, as beta team members ( and thus beta work units ) are not meant to have a higher ppd.

Overvoltage · 02-21-2012, 05:08 PM

Quote:

Originally Posted by _MtM_

OverVoltage, are you a member or are you running betateam flag without being a member? If so, that means I won't help you in the future unless I see logs showing you're not running the flag. Not because I'm a ****, but because beta team is get's official support, on the support forums, they have their own section. People willing to run the flag should sign up so they can give feedback on work units when they feel something is in the miss ( or not, at times ). It's a good place, I'm not in the position to contribute since my range of hw doesn't cover anything currently running in beta phase, but I can tell you the feedback is appreciated and it's also being listened to.

Also, you might have found the ONLY wu's which are coming out of beta which are giving a higher ppd then regular work units, as beta team members ( and thus beta work units ) are not meant to have a higher ppd.

I'll try and not jump to conclusions here, because I am not sure what you just said.

You seem to know more than I do about this folding stuff. I just download clients plug in my user name passkey and the 11314 team number which I thought was open to any user of the site because I like to help with the understanding of protein folding as it relates to medical science. I just keep the machine running consistently.
I'm not part of any beta team and not interested in the cutting edge of folding since I use a q6600 cpu that has been running at 100% load for 5 years and a gtx480 that is so loud when it folds that I've been dialing the thing down since I bought it a year ago to keep noise reasonable. About 2 weeks ago my uncle let me start using some i5 machines he has in addition to mine.
If I was given a unit I shouldn't have been, can you explain how I did that since I'm not sure how I did it.

My folding problem which you and others helped with came from an inability to connect with the server through a port which was defaulting to one my hardware was not allowing access too through the 6.41r2 and 6.34 clients which I downloaded many months ago (probably a year) when I put in a new motherboard. Honestly most of the talk people have going on here is way over my head and I only pipe up when things are not clear to me.

Code:

--- Opening Log file [February 17 11:23:16 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.34

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: D:\Back-up-August2011crash\Folding@Home Windows SMP Client V1.01
Executable: D:\Back-up-August2011crash\Folding@Home Windows SMP Client V1.01\FAH6.34-win32-SMP.exe
Arguments: -smp 4 -verbosity 9 

[11:23:16] - Ask before connecting: No
[11:23:16] - User name: Overvoltage (Team 11314)
[11:23:16] - User ID: 1CEAE09A7D80A5A1
[11:23:16] - Machine ID: 1
[11:23:16] 
[11:23:16] Loaded queue successfully.
[11:23:16] 
[11:23:16] - Autosending finished units... [February 17 11:23:16 UTC]
[11:23:16] + Processing work unit
[11:23:16] Trying to send all finished work units
[11:23:16] Core required: FahCore_a3.exe
[11:23:16] + No unsent completed units remaining.
[11:23:16] Core found.
[11:23:16] - Autosend completed
[11:23:17] Working on queue slot 03 [February 17 11:23:17 UTC]
[11:23:17] + Working ...
[11:23:17] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 03 -np 4 -nocpulock -checkpoint 4 -verbose -lifeline 3608 -version 634'

[11:23:17] 
[11:23:17] *------------------------------*
[11:23:17] Folding@Home Gromacs SMP Core
[11:23:17] Version 2.27 (Dec. 15, 2010)
[11:23:17] 
[11:23:17] Preparing to commence simulation
[11:23:17] - Ensuring status. Please wait.
[11:23:27] - Looking at optimizations...
[11:23:27] - Working with standard loops on this execution.
[11:23:27] - Previous termination of core was improper.
[11:23:27] - Files status OK
[11:23:27] - Expanded 766529 -> 1204688 (decompressed 157.1 percent)
[11:23:27] Called DecompressByteArray: compressed_data_size=766529 data_size=1204688, decompressed_data_size=1204688 diff=0
[11:23:27] - Digital signature verified
[11:23:27] 
[11:23:27] Project: 11021 (Run 0, Clone 4030, Gen 46)
[11:23:27] 
[11:23:27] Entering M.D.
[11:23:33] Using Gromacs checkpoints
[11:23:33] Mapping NT from 4 to 4 
[11:23:33] Resuming from checkpoint
[11:23:33] Verified work/wudata_03.log
[11:23:34] Verified work/wudata_03.trr
[11:23:34] Verified work/wudata_03.xtc
[11:23:34] Verified work/wudata_03.edr
[11:23:35] Completed 669140 out of 1000000 steps  (66%)
[11:24:05] Completed 670000 out of 1000000 steps  (67%)
[11:29:50] Completed 680000 out of 1000000 steps  (68%)
[11:35:49] Completed 690000 out of 1000000 steps  (69%)
[11:41:15] Completed 700000 out of 1000000 steps  (70%)
[11:50:35] Completed 710000 out of 1000000 steps  (71%)
[11:56:11] Completed 720000 out of 1000000 steps  (72%)
[12:01:37] Completed 730000 out of 1000000 steps  (73%)
[12:07:04] Completed 740000 out of 1000000 steps  (74%)
[12:12:30] Completed 750000 out of 1000000 steps  (75%)
[12:17:57] Completed 760000 out of 1000000 steps  (76%)
[12:23:25] Completed 770000 out of 1000000 steps  (77%)
[12:28:50] Completed 780000 out of 1000000 steps  (78%)
[12:39:12] Completed 790000 out of 1000000 steps  (79%)
[12:44:39] Completed 800000 out of 1000000 steps  (80%)
[12:50:05] Completed 810000 out of 1000000 steps  (81%)
[12:55:31] Completed 820000 out of 1000000 steps  (82%)
[13:00:57] Completed 830000 out of 1000000 steps  (83%)
[13:06:23] Completed 840000 out of 1000000 steps  (84%)
[13:11:49] Completed 850000 out of 1000000 steps  (85%)
[13:17:14] Completed 860000 out of 1000000 steps  (86%)
[13:22:40] Completed 870000 out of 1000000 steps  (87%)
[13:28:06] Completed 880000 out of 1000000 steps  (88%)
[13:33:31] Completed 890000 out of 1000000 steps  (89%)
[13:38:55] Completed 900000 out of 1000000 steps  (90%)
[13:44:21] Completed 910000 out of 1000000 steps  (91%)
[13:49:45] Completed 920000 out of 1000000 steps  (92%)
[13:55:11] Completed 930000 out of 1000000 steps  (93%)
[14:00:37] Completed 940000 out of 1000000 steps  (94%)
[14:06:03] Completed 950000 out of 1000000 steps  (95%)
[14:11:29] Completed 960000 out of 1000000 steps  (96%)
[14:16:56] Completed 970000 out of 1000000 steps  (97%)
[14:22:22] Completed 980000 out of 1000000 steps  (98%)
[14:27:49] Completed 990000 out of 1000000 steps  (99%)
[14:33:14] Completed 1000000 out of 1000000 steps  (100%)
[14:33:15] DynamicWrapper: Finished Work Unit: sleep=10000
[14:33:25] 
[14:33:25] Finished Work Unit:
[14:33:25] - Reading up to 7890696 from "work/wudata_03.trr": Read 7890696
[14:33:25] trr file hash check passed.
[14:33:25] - Reading up to 1183652 from "work/wudata_03.xtc": Read 1183652
[14:33:25] xtc file hash check passed.
[14:33:25] edr file hash check passed.
[14:33:25] logfile size: 44118
[14:33:25] Leaving Run
[14:33:27] - Writing 9125830 bytes of core data to disk...
[14:33:29] Done: 9125318 -> 8708351 (compressed to 95.4 percent)
[14:33:29]   ... Done.
[14:33:30] - Shutting down core
[14:33:30] 
[14:33:30] Folding@home Core Shutdown: FINISHED_UNIT
[14:33:32] CoreStatus = 64 (100)
[14:33:32] Unit 3 finished with 94 percent of time to deadline remaining.
[14:33:32] Updated performance fraction: 0.960768
[14:33:32] Sending work to server
[14:33:32] Project: 11021 (Run 0, Clone 4030, Gen 46)


[14:33:32] + Attempting to send results [February 17 14:33:32 UTC]
[14:33:32] - Reading file work/wuresults_03.dat from core
[14:33:32]   (Read 8708863 bytes from disk)
[14:33:33] Connecting to http://171.64.65.55:80/
[14:34:46] Posted data.
[14:34:46] Initial: 0000; - Uploaded at ~116 kB/s
[14:34:46] - Averaged speed for that direction ~113 kB/s
[14:34:46] + Results successfully sent
[14:34:46] Thank you for your contribution to Folding@Home.
[14:34:46] + Number of Units Completed: 473

[14:34:51] Trying to send all finished work units
[14:34:51] + No unsent completed units remaining.
[14:34:51] - Preparing to get new work unit...
[14:34:51] Cleaning up work directory
[14:34:51] + Attempting to get work packet
[14:34:51] Passkey found
[14:34:51] - Will indicate memory of 4095 MB
[14:34:51] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 15, Stepping: 7
[14:34:51] - Connecting to assignment server
[14:34:51] Connecting to http://assign.stanford.edu:8080/
[14:34:51] - Couldn't send HTTP request to server
[14:34:51]   (Got status 403)
[14:34:51] + Could not connect to Assignment Server
[14:34:51] Connecting to http://assign2.stanford.edu:80/
[14:34:52] Posted data.
[14:34:52] Initial: 40AB; - Successful: assigned to (171.64.65.55).
[14:34:52] + News From Folding@Home: Welcome to Folding@Home
[14:34:52] Loaded queue successfully.
[14:34:52] Sent data
[14:34:52] Connecting to http://171.64.65.55:80/
[14:34:53] Posted data.
[14:34:53] Initial: 0000; - Receiving payload (expected size: 660367)
[14:34:55] - Downloaded at ~322 kB/s
[14:34:55] - Averaged speed for that direction ~428 kB/s
[14:34:55] + Received work.
[14:34:55] Trying to send all finished work units
[14:34:55] + No unsent completed units remaining.
[14:34:55] + Closed connections
[14:34:55] 
[14:34:55] + Processing work unit
[14:34:55] Core required: FahCore_a3.exe
[14:34:55] Core found.
[14:34:55] Working on queue slot 04 [February 17 14:34:55 UTC]
[14:34:55] + Working ...
[14:34:55] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 04 -np 4 -nocpulock -checkpoint 4 -verbose -lifeline 3608 -version 634'

[14:34:55] 
[14:34:55] *------------------------------*
[14:34:55] Folding@Home Gromacs SMP Core
[14:34:55] Version 2.27 (Dec. 15, 2010)
[14:34:55] 
[14:34:55] Preparing to commence simulation
[14:34:55] - Looking at optimizations...
[14:34:55] - Created dyn
[14:34:55] - Files status OK
[14:34:55] - Expanded 659855 -> 1092080 (decompressed 165.5 percent)
[14:34:55] Called DecompressByteArray: compressed_data_size=659855 data_size=1092080, decompressed_data_size=1092080 diff=0
[14:34:55] - Digital signature verified
[14:34:55] 
[14:34:55] Project: 11060 (Run 0, Clone 2136, Gen 31)
[14:34:55] 
[14:34:55] Assembly optimizations on if available.
[14:34:55] Entering M.D.
[14:35:01] Mapping NT from 4 to 4 
[14:35:01] Completed 0 out of 1000000 steps  (0%)
[14:39:55] Completed 10000 out of 1000000 steps  (1%)
[14:44:49] Completed 20000 out of 1000000 steps  (2%)
[14:49:44] Completed 30000 out of 1000000 steps  (3%)
[14:54:38] Completed 40000 out of 1000000 steps  (4%)
[14:59:32] Completed 50000 out of 1000000 steps  (5%)
[15:04:27] Completed 60000 out of 1000000 steps  (6%)
[15:09:22] Completed 70000 out of 1000000 steps  (7%)
[15:14:17] Completed 80000 out of 1000000 steps  (8%)
[15:19:10] Completed 90000 out of 1000000 steps  (9%)
[15:24:08] Completed 100000 out of 1000000 steps  (10%)
[15:29:02] Completed 110000 out of 1000000 steps  (11%)
[15:33:57] Completed 120000 out of 1000000 steps  (12%)
[15:38:49] Completed 130000 out of 1000000 steps  (13%)
[15:43:43] Completed 140000 out of 1000000 steps  (14%)
[15:48:37] Completed 150000 out of 1000000 steps  (15%)
[15:53:31] Completed 160000 out of 1000000 steps  (16%)
[15:58:25] Completed 170000 out of 1000000 steps  (17%)
[16:03:18] Completed 180000 out of 1000000 steps  (18%)
[16:08:12] Completed 190000 out of 1000000 steps  (19%)
[16:13:06] Completed 200000 out of 1000000 steps  (20%)
[16:18:00] Completed 210000 out of 1000000 steps  (21%)
[16:22:53] Completed 220000 out of 1000000 steps  (22%)
[16:27:48] Completed 230000 out of 1000000 steps  (23%)
[16:37:38] Completed 240000 out of 1000000 steps  (24%)
[16:42:32] Completed 250000 out of 1000000 steps  (25%)
[16:47:29] Completed 260000 out of 1000000 steps  (26%)
[16:52:22] Completed 270000 out of 1000000 steps  (27%)
[16:57:15] Completed 280000 out of 1000000 steps  (28%)
[17:02:09] Completed 290000 out of 1000000 steps  (29%)
[17:07:03] Completed 300000 out of 1000000 steps  (30%)
[17:11:56] Completed 310000 out of 1000000 steps  (31%)
[17:16:51] Completed 320000 out of 1000000 steps  (32%)
[17:21:44] Completed 330000 out of 1000000 steps  (33%)
[17:23:16] - Autosending finished units... [February 17 17:23:16 UTC]
[17:23:16] Trying to send all finished work units
[17:23:16] + No unsent completed units remaining.
[17:23:16] - Autosend completed
[17:26:45] Completed 340000 out of 1000000 steps  (34%)
[17:31:39] Completed 350000 out of 1000000 steps  (35%)
[17:36:34] Completed 360000 out of 1000000 steps  (36%)
[17:41:27] Completed 370000 out of 1000000 steps  (37%)
[17:46:20] Completed 380000 out of 1000000 steps  (38%)
[17:51:43] Completed 390000 out of 1000000 steps  (39%)
[17:57:36] Completed 400000 out of 1000000 steps  (40%)
[18:03:13] Completed 410000 out of 1000000 steps  (41%)
[18:08:53] Completed 420000 out of 1000000 steps  (42%)
[18:14:30] Completed 430000 out of 1000000 steps  (43%)
[18:20:19] Completed 440000 out of 1000000 steps  (44%)
[18:26:07] Completed 450000 out of 1000000 steps  (45%)
[18:31:51] Completed 460000 out of 1000000 steps  (46%)
[18:37:37] Completed 470000 out of 1000000 steps  (47%)
[18:43:21] Completed 480000 out of 1000000 steps  (48%)
[18:49:01] Completed 490000 out of 1000000 steps  (49%)
[18:54:44] Completed 500000 out of 1000000 steps  (50%)
[19:00:24] Completed 510000 out of 1000000 steps  (51%)
[19:06:06] Completed 520000 out of 1000000 steps  (52%)
[19:11:44] Completed 530000 out of 1000000 steps  (53%)
[19:16:54] Completed 540000 out of 1000000 steps  (54%)
[19:21:52] Completed 550000 out of 1000000 steps  (55%)
[19:26:49] Completed 560000 out of 1000000 steps  (56%)
[19:31:43] Completed 570000 out of 1000000 steps  (57%)
[19:36:40] Completed 580000 out of 1000000 steps  (58%)
[19:41:33] Completed 590000 out of 1000000 steps  (59%)
[19:46:27] Completed 600000 out of 1000000 steps  (60%)
[19:51:21] Completed 610000 out of 1000000 steps  (61%)
[19:56:16] Completed 620000 out of 1000000 steps  (62%)
[20:01:17] Completed 630000 out of 1000000 steps  (63%)
[20:07:08] Completed 640000 out of 1000000 steps  (64%)
[20:12:44] Completed 650000 out of 1000000 steps  (65%)
[20:18:21] Completed 660000 out of 1000000 steps  (66%)
[20:24:38] Completed 670000 out of 1000000 steps  (67%)
[20:30:10] Completed 680000 out of 1000000 steps  (68%)
[20:40:34] Completed 690000 out of 1000000 steps  (69%)
[20:46:20] Completed 700000 out of 1000000 steps  (70%)
[20:52:48] Completed 710000 out of 1000000 steps  (71%)
[20:59:34] Completed 720000 out of 1000000 steps  (72%)
[21:07:00] Completed 730000 out of 1000000 steps  (73%)
[21:12:58] Completed 740000 out of 1000000 steps  (74%)
[21:19:04] Completed 750000 out of 1000000 steps  (75%)
[21:24:26] Completed 760000 out of 1000000 steps  (76%)
[21:29:52] Completed 770000 out of 1000000 steps  (77%)
[21:35:27] Completed 780000 out of 1000000 steps  (78%)
[21:41:49] Completed 790000 out of 1000000 steps  (79%)
[21:48:09] Completed 800000 out of 1000000 steps  (80%)
[21:54:34] Completed 810000 out of 1000000 steps  (81%)
[22:00:38] Completed 820000 out of 1000000 steps  (82%)
[22:07:19] Completed 830000 out of 1000000 steps  (83%)
[22:14:08] Completed 840000 out of 1000000 steps  (84%)
[22:20:52] Completed 850000 out of 1000000 steps  (85%)
[22:27:37] Completed 860000 out of 1000000 steps  (86%)
[22:34:00] Completed 870000 out of 1000000 steps  (87%)
[22:40:22] Completed 880000 out of 1000000 steps  (88%)
[22:46:51] Completed 890000 out of 1000000 steps  (89%)
[22:53:25] Completed 900000 out of 1000000 steps  (90%)
[22:59:45] Completed 910000 out of 1000000 steps  (91%)
[23:07:33] Completed 920000 out of 1000000 steps  (92%)
[23:15:04] Completed 930000 out of 1000000 steps  (93%)
[23:21:50] Completed 940000 out of 1000000 steps  (94%)
[23:23:16] - Autosending finished units... [February 17 23:23:16 UTC]
[23:23:16] Trying to send all finished work units
[23:23:16] + No unsent completed units remaining.
[23:23:16] - Autosend completed
[23:27:55] Completed 950000 out of 1000000 steps  (95%)
[23:34:18] Completed 960000 out of 1000000 steps  (96%)
[23:40:45] Completed 970000 out of 1000000 steps  (97%)
[23:46:48] Completed 980000 out of 1000000 steps  (98%)
[23:51:59] Completed 990000 out of 1000000 steps  (99%)
[23:57:17] Completed 1000000 out of 1000000 steps  (100%)
[23:57:17] DynamicWrapper: Finished Work Unit: sleep=10000
[23:57:28] 
[23:57:28] Finished Work Unit:
[23:57:28] - Reading up to 604728 from "work/wudata_04.trr": Read 604728
[23:57:28] trr file hash check passed.
[23:57:28] - Reading up to 999480 from "work/wudata_04.xtc": Read 999480
[23:57:28] xtc file hash check passed.
[23:57:28] edr file hash check passed.
[23:57:28] logfile size: 34715
[23:57:28] Leaving Run
[23:57:29] - Writing 1646287 bytes of core data to disk...
[23:57:29] Done: 1645775 -> 1600782 (compressed to 97.2 percent)
[23:57:29]   ... Done.
[23:57:29] - Shutting down core
[23:57:29] 
[23:57:29] Folding@home Core Shutdown: FINISHED_UNIT
[23:57:33] CoreStatus = 64 (100)
[23:57:33] Unit 4 finished with 97 percent of time to deadline remaining.
[23:57:33] Updated performance fraction: 0.962103
[23:57:33] Sending work to server
[23:57:33] Project: 11060 (Run 0, Clone 2136, Gen 31)


[23:57:33] + Attempting to send results [February 17 23:57:33 UTC]
[23:57:33] - Reading file work/wuresults_04.dat from core
[23:57:33]   (Read 1601294 bytes from disk)
[23:57:33] Connecting to http://171.64.65.55:80/
[23:57:47] Posted data.
[23:57:47] Initial: 0000; - Uploaded at ~111 kB/s
[23:57:47] - Averaged speed for that direction ~113 kB/s
[23:57:47] + Results successfully sent
[23:57:47] Thank you for your contribution to Folding@Home.
[23:57:47] + Number of Units Completed: 474

[23:57:51] Trying to send all finished work units
[23:57:51] + No unsent completed units remaining.
[23:57:51] - Preparing to get new work unit...
[23:57:51] Cleaning up work directory
[23:57:51] + Attempting to get work packet
[23:57:51] Passkey found
[23:57:51] - Will indicate memory of 4095 MB
[23:57:51] - Connecting to assignment server
[23:57:51] Connecting to http://assign.stanford.edu:8080/
[23:57:51] - Couldn't send HTTP request to server
[23:57:51]   (Got status 403)
[23:57:51] + Could not connect to Assignment Server
[23:57:51] Connecting to http://assign2.stanford.edu:80/
[23:57:52] Posted data.
[23:57:52] Initial: 40AB; - Successful: assigned to (171.64.65.55).
[23:57:52] + News From Folding@Home: Welcome to Folding@Home
[23:57:52] Loaded queue successfully.
[23:57:52] Sent data
[23:57:52] Connecting to http://171.64.65.55:80/
[23:57:53] Posted data.
[23:57:53] Initial: 0000; - Receiving payload (expected size: 765413)
[23:57:56] - Downloaded at ~249 kB/s
[23:57:56] - Averaged speed for that direction ~392 kB/s
[23:57:56] + Received work.
[23:57:56] Trying to send all finished work units
[23:57:56] + No unsent completed units remaining.
[23:57:56] + Closed connections
[23:57:56] 
[23:57:56] + Processing work unit
[23:57:56] Core required: FahCore_a3.exe
[23:57:56] Core found.
[23:57:56] Working on queue slot 05 [February 17 23:57:56 UTC]
[23:57:56] + Working ...
[23:57:56] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 05 -np 4 -nocpulock -checkpoint 4 -verbose -lifeline 3608 -version 634'

[23:57:56] 
[23:57:56] *------------------------------*
[23:57:56] Folding@Home Gromacs SMP Core
[23:57:56] Version 2.27 (Dec. 15, 2010)
[23:57:56] 
[23:57:56] Preparing to commence simulation
[23:57:56] - Looking at optimizations...
[23:57:56] - Created dyn
[23:57:56] - Files status OK
[23:57:57] - Expanded 764901 -> 1324228 (decompressed 173.1 percent)
[23:57:57] Called DecompressByteArray: compressed_data_size=764901 data_size=1324228, decompressed_data_size=1324228 diff=0
[23:57:57] - Digital signature verified
[23:57:57] 
[23:57:57] Project: 11061 (Run 0, Clone 2033, Gen 27)
[23:57:57] 
[23:57:57] Assembly optimizations on if available.
[23:57:57] Entering M.D.
[23:58:02] Mapping NT from 4 to 4 
[23:58:03] Completed 0 out of 1000000 steps  (0%)
[00:03:45] Completed 10000 out of 1000000 steps  (1%)
[00:10:25] Completed 20000 out of 1000000 steps  (2%)
[00:17:07] Completed 30000 out of 1000000 steps  (3%)
[00:23:50] Completed 40000 out of 1000000 steps  (4%)
[00:29:46] Completed 50000 out of 1000000 steps  (5%)
[00:35:16] Completed 60000 out of 1000000 steps  (6%)
[00:40:45] Completed 70000 out of 1000000 steps  (7%)
[00:46:15] Completed 80000 out of 1000000 steps  (8%)
[00:51:43] Completed 90000 out of 1000000 steps  (9%)
[00:57:14] Completed 100000 out of 1000000 steps  (10%)
[01:07:39] Completed 110000 out of 1000000 steps  (11%)
[01:13:07] Completed 120000 out of 1000000 steps  (12%)
[01:18:36] Completed 130000 out of 1000000 steps  (13%)
[01:24:07] Completed 140000 out of 1000000 steps  (14%)
[01:29:36] Completed 150000 out of 1000000 steps  (15%)
[01:35:05] Completed 160000 out of 1000000 steps  (16%)
[01:40:32] Completed 170000 out of 1000000 steps  (17%)
[01:46:02] Completed 180000 out of 1000000 steps  (18%)
[01:51:30] Completed 190000 out of 1000000 steps  (19%)
[01:57:01] Completed 200000 out of 1000000 steps  (20%)
[02:02:29] Completed 210000 out of 1000000 steps  (21%)
[02:07:59] Completed 220000 out of 1000000 steps  (22%)
[02:13:27] Completed 230000 out of 1000000 steps  (23%)
[02:18:57] Completed 240000 out of 1000000 steps  (24%)
[02:24:27] Completed 250000 out of 1000000 steps  (25%)
[02:29:55] Completed 260000 out of 1000000 steps  (26%)
[02:35:22] Completed 270000 out of 1000000 steps  (27%)
[02:40:50] Completed 280000 out of 1000000 steps  (28%)
[02:46:19] Completed 290000 out of 1000000 steps  (29%)
[02:51:46] Completed 300000 out of 1000000 steps  (30%)
[02:57:17] Completed 310000 out of 1000000 steps  (31%)
[03:02:47] Completed 320000 out of 1000000 steps  (32%)
[03:08:16] Completed 330000 out of 1000000 steps  (33%)
[03:13:49] Completed 340000 out of 1000000 steps  (34%)
[03:19:18] Completed 350000 out of 1000000 steps  (35%)
[03:24:49] Completed 360000 out of 1000000 steps  (36%)
[03:30:17] Completed 370000 out of 1000000 steps  (37%)
[03:35:46] Completed 380000 out of 1000000 steps  (38%)
[03:41:18] Completed 390000 out of 1000000 steps  (39%)
[03:46:48] Completed 400000 out of 1000000 steps  (40%)
[03:52:19] Completed 410000 out of 1000000 steps  (41%)
[03:57:52] Completed 420000 out of 1000000 steps  (42%)
[04:03:22] Completed 430000 out of 1000000 steps  (43%)
[04:08:54] Completed 440000 out of 1000000 steps  (44%)
[04:14:25] Completed 450000 out of 1000000 steps  (45%)
[04:19:57] Completed 460000 out of 1000000 steps  (46%)
[04:25:28] Completed 470000 out of 1000000 steps  (47%)
[04:30:57] Completed 480000 out of 1000000 steps  (48%)
[04:36:29] Completed 490000 out of 1000000 steps  (49%)
[04:41:57] Completed 500000 out of 1000000 steps  (50%)
[04:47:29] Completed 510000 out of 1000000 steps  (51%)
[04:53:00] Completed 520000 out of 1000000 steps  (52%)
[04:58:33] Completed 530000 out of 1000000 steps  (53%)
[05:08:59] Completed 540000 out of 1000000 steps  (54%)
[05:14:29] Completed 550000 out of 1000000 steps  (55%)
[05:20:00] Completed 560000 out of 1000000 steps  (56%)
[05:23:16] - Autosending finished units... [February 18 05:23:16 UTC]
[05:23:16] Trying to send all finished work units
[05:23:16] + No unsent completed units remaining.
[05:23:16] - Autosend completed
[05:25:37] Completed 570000 out of 1000000 steps  (57%)
[05:31:57] Completed 580000 out of 1000000 steps  (58%)
[05:40:39] Completed 590000 out of 1000000 steps  (59%)
[05:46:12] Completed 600000 out of 1000000 steps  (60%)
[05:51:41] Completed 610000 out of 1000000 steps  (61%)
[05:57:14] Completed 620000 out of 1000000 steps  (62%)
[06:02:43] Completed 630000 out of 1000000 steps  (63%)
[06:08:16] Completed 640000 out of 1000000 steps  (64%)
[06:13:44] Completed 650000 out of 1000000 steps  (65%)
[06:19:14] Completed 660000 out of 1000000 steps  (66%)
[06:24:47] Completed 670000 out of 1000000 steps  (67%)
[06:30:18] Completed 680000 out of 1000000 steps  (68%)
[06:35:49] Completed 690000 out of 1000000 steps  (69%)
[06:41:19] Completed 700000 out of 1000000 steps  (70%)
[06:46:51] Completed 710000 out of 1000000 steps  (71%)
[06:52:20] Completed 720000 out of 1000000 steps  (72%)
[06:57:52] Completed 730000 out of 1000000 steps  (73%)
[07:03:22] Completed 740000 out of 1000000 steps  (74%)
[07:09:09] Completed 750000 out of 1000000 steps  (75%)
[07:15:09] Completed 760000 out of 1000000 steps  (76%)
[07:21:34] Completed 770000 out of 1000000 steps  (77%)
[07:28:09] Completed 780000 out of 1000000 steps  (78%)
[07:34:39] Completed 790000 out of 1000000 steps  (79%)
[07:41:10] Completed 800000 out of 1000000 steps  (80%)
[07:48:00] Completed 810000 out of 1000000 steps  (81%)
[07:54:45] Completed 820000 out of 1000000 steps  (82%)
[08:01:41] Completed 830000 out of 1000000 steps  (83%)
[08:08:14] Completed 840000 out of 1000000 steps  (84%)
[08:15:11] Completed 850000 out of 1000000 steps  (85%)
[08:21:45] Completed 860000 out of 1000000 steps  (86%)
[08:28:37] Completed 870000 out of 1000000 steps  (87%)
[08:35:29] Completed 880000 out of 1000000 steps  (88%)
[08:44:57] Completed 890000 out of 1000000 steps  (89%)
[08:51:41] Completed 900000 out of 1000000 steps  (90%)
[08:58:25] Completed 910000 out of 1000000 steps  (91%)
[09:11:23] Completed 920000 out of 1000000 steps  (92%)
[09:18:05] Completed 930000 out of 1000000 steps  (93%)
[09:24:35] Completed 940000 out of 1000000 steps  (94%)
[09:31:21] Completed 950000 out of 1000000 steps  (95%)
[09:37:32] Completed 960000 out of 1000000 steps  (96%)
[09:43:29] Completed 970000 out of 1000000 steps  (97%)
[09:49:31] Completed 980000 out of 1000000 steps  (98%)
[09:55:55] Completed 990000 out of 1000000 steps  (99%)
[10:02:16] Completed 1000000 out of 1000000 steps  (100%)
[10:02:16] DynamicWrapper: Finished Work Unit: sleep=10000
[10:02:26] 
[10:02:26] Finished Work Unit:
[10:02:26] - Reading up to 717336 from "work/wudata_05.trr": Read 717336
[10:02:26] trr file hash check passed.
[10:02:26] - Reading up to 81476 from "work/wudata_05.xtc": Read 81476
[10:02:26] xtc file hash check passed.
[10:02:26] edr file hash check passed.
[10:02:26] logfile size: 35424
[10:02:26] Leaving Run
[10:02:30] - Writing 841600 bytes of core data to disk...
[10:02:30] Done: 841088 -> 783167 (compressed to 93.1 percent)
[10:02:30]   ... Done.
[10:02:30] - Shutting down core
[10:02:30] 
[10:02:30] Folding@home Core Shutdown: FINISHED_UNIT
[10:02:34] CoreStatus = 64 (100)
[10:02:34] Unit 5 finished with 97 percent of time to deadline remaining.
[10:02:34] Updated performance fraction: 0.962684
[10:02:34] Sending work to server
[10:02:34] Project: 11061 (Run 0, Clone 2033, Gen 27)


[10:02:34] + Attempting to send results [February 18 10:02:34 UTC]
[10:02:34] - Reading file work/wuresults_05.dat from core
[10:02:34]   (Read 783679 bytes from disk)
[10:02:34] Connecting to http://171.64.65.55:80/
[10:02:55] Posted data.
[10:02:55] Initial: 0000; - Uploaded at ~36 kB/s
[10:02:55] - Averaged speed for that direction ~97 kB/s
[10:02:55] + Results successfully sent
[10:02:55] Thank you for your contribution to Folding@Home.
[10:02:55] + Number of Units Completed: 475

[10:02:59] Trying to send all finished work units
[10:02:59] + No unsent completed units remaining.
[10:02:59] - Preparing to get new work unit...
[10:02:59] Cleaning up work directory
[10:02:59] + Attempting to get work packet
[10:02:59] Passkey found
[10:02:59] - Will indicate memory of 4095 MB
[10:02:59] - Connecting to assignment server
[10:02:59] Connecting to http://assign.stanford.edu:8080/
[10:03:00] - Couldn't send HTTP request to server
[10:03:00]   (Got status 403)
[10:03:00] + Could not connect to Assignment Server
[10:03:00] Connecting to http://assign2.stanford.edu:80/
[10:03:01] Posted data.
[10:03:01] Initial: 40AB; - Successful: assigned to (171.64.65.55).
[10:03:01] + News From Folding@Home: Welcome to Folding@Home
[10:03:01] Loaded queue successfully.
[10:03:01] Sent data
[10:03:01] Connecting to http://171.64.65.55:80/
[10:03:03] Posted data.
[10:03:03] Initial: 0000; - Receiving payload (expected size: 925373)
[10:03:09] - Downloaded at ~150 kB/s
[10:03:09] - Averaged speed for that direction ~344 kB/s
[10:03:09] + Received work.
[10:03:09] Trying to send all finished work units
[10:03:09] + No unsent completed units remaining.
[10:03:09] + Closed connections
[10:03:09] 
[10:03:09] + Processing work unit
[10:03:09] Core required: FahCore_a3.exe
[10:03:09] Core found.
[10:03:09] Working on queue slot 06 [February 18 10:03:09 UTC]
[10:03:09] + Working ...
[10:03:09] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 06 -np 4 -nocpulock -checkpoint 4 -verbose -lifeline 3608 -version 634'

[10:03:09] 
[10:03:09] *------------------------------*
[10:03:09] Folding@Home Gromacs SMP Core
[10:03:09] Version 2.27 (Dec. 15, 2010)
[10:03:09] 
[10:03:09] Preparing to commence simulation
[10:03:09] - Looking at optimizations...
[10:03:09] - Created dyn
[10:03:09] - Files status OK
[10:03:09] - Expanded 924861 -> 1378244 (decompressed 149.0 percent)
[10:03:09] Called DecompressByteArray: compressed_data_size=924861 data_size=1378244, decompressed_data_size=1378244 diff=0
[10:03:09] - Digital signature verified
[10:03:09] 
[10:03:09] Project: 11041 (Run 0, Clone 897, Gen 29)
[10:03:09] 
[10:03:09] Assembly optimizations on if available.
[10:03:09] Entering M.D.
[10:03:15] Mapping NT from 4 to 4 
[10:03:15] Completed 0 out of 1000000 steps  (0%)
[10:11:00] Completed 10000 out of 1000000 steps  (1%)
[10:18:30] Completed 20000 out of 1000000 steps  (2%)
[10:26:00] Completed 30000 out of 1000000 steps  (3%)
[10:33:29] Completed 40000 out of 1000000 steps  (4%)
[10:40:51] Completed 50000 out of 1000000 steps  (5%)
[10:47:51] Completed 60000 out of 1000000 steps  (6%)
[10:54:34] Completed 70000 out of 1000000 steps  (7%)
[11:01:16] Completed 80000 out of 1000000 steps  (8%)
[11:07:53] Completed 90000 out of 1000000 steps  (9%)
[11:14:28] Completed 100000 out of 1000000 steps  (10%)
[11:21:03] Completed 110000 out of 1000000 steps  (11%)
[11:23:16] - Autosending finished units... [February 18 11:23:16 UTC]
[11:23:16] Trying to send all finished work units
[11:23:16] + No unsent completed units remaining.
[11:23:16] - Autosend completed
[11:27:45] Completed 120000 out of 1000000 steps  (12%)
[11:34:20] Completed 130000 out of 1000000 steps  (13%)
[11:40:55] Completed 140000 out of 1000000 steps  (14%)
[11:47:30] Completed 150000 out of 1000000 steps  (15%)
[11:54:09] Completed 160000 out of 1000000 steps  (16%)
[12:00:44] Completed 170000 out of 1000000 steps  (17%)
[12:07:20] Completed 180000 out of 1000000 steps  (18%)
[12:13:54] Completed 190000 out of 1000000 steps  (19%)
[12:20:29] Completed 200000 out of 1000000 steps  (20%)
[12:27:06] Completed 210000 out of 1000000 steps  (21%)
[12:33:41] Completed 220000 out of 1000000 steps  (22%)
[12:40:17] Completed 230000 out of 1000000 steps  (23%)
[12:46:52] Completed 240000 out of 1000000 steps  (24%)
[12:53:27] Completed 250000 out of 1000000 steps  (25%)
[13:00:03] Completed 260000 out of 1000000 steps  (26%)
[13:11:32] Completed 270000 out of 1000000 steps  (27%)
[13:18:09] Completed 280000 out of 1000000 steps  (28%)
[13:24:44] Completed 290000 out of 1000000 steps  (29%)
[13:31:20] Completed 300000 out of 1000000 steps  (30%)
[13:37:55] Completed 310000 out of 1000000 steps  (31%)
[13:44:29] Completed 320000 out of 1000000 steps  (32%)
[13:51:04] Completed 330000 out of 1000000 steps  (33%)
[13:57:41] Completed 340000 out of 1000000 steps  (34%)
[14:04:16] Completed 350000 out of 1000000 steps  (35%)
[14:10:50] Completed 360000 out of 1000000 steps  (36%)
[14:17:24] Completed 370000 out of 1000000 steps  (37%)
[14:24:01] Completed 380000 out of 1000000 steps  (38%)
[14:30:35] Completed 390000 out of 1000000 steps  (39%)
[14:37:10] Completed 400000 out of 1000000 steps  (40%)
[14:43:44] Completed 410000 out of 1000000 steps  (41%)
[14:50:19] Completed 420000 out of 1000000 steps  (42%)
[14:56:55] Completed 430000 out of 1000000 steps  (43%)
[15:03:31] Completed 440000 out of 1000000 steps  (44%)
[15:10:07] Completed 450000 out of 1000000 steps  (45%)
[15:16:43] Completed 460000 out of 1000000 steps  (46%)
[15:23:17] Completed 470000 out of 1000000 steps  (47%)
[15:29:54] Completed 480000 out of 1000000 steps  (48%)
[15:36:31] Completed 490000 out of 1000000 steps  (49%)
[15:43:05] Completed 500000 out of 1000000 steps  (50%)
[15:49:39] Completed 510000 out of 1000000 steps  (51%)
[15:56:15] Completed 520000 out of 1000000 steps  (52%)
[16:02:50] Completed 530000 out of 1000000 steps  (53%)
[16:09:25] Completed 540000 out of 1000000 steps  (54%)
[16:16:00] Completed 550000 out of 1000000 steps  (55%)
[16:22:35] Completed 560000 out of 1000000 steps  (56%)
[16:29:14] Completed 570000 out of 1000000 steps  (57%)
[16:35:58] Completed 580000 out of 1000000 steps  (58%)
[16:42:42] Completed 590000 out of 1000000 steps  (59%)
[16:50:14] Completed 600000 out of 1000000 steps  (60%)
[16:58:00] Completed 610000 out of 1000000 steps  (61%)
[17:11:52] Completed 620000 out of 1000000 steps  (62%)
[17:20:58] Completed 630000 out of 1000000 steps  (63%)
[17:23:16] - Autosending finished units... [February 18 17:23:16 UTC]
[17:23:16] Trying to send all finished work units
[17:23:16] + No unsent completed units remaining.
[17:23:16] - Autosend completed
[17:30:05] Completed 640000 out of 1000000 steps  (64%)
[17:39:06] Completed 650000 out of 1000000 steps  (65%)
[17:47:24] Completed 660000 out of 1000000 steps  (66%)
[17:56:20] Completed 670000 out of 1000000 steps  (67%)
[18:04:58] Completed 680000 out of 1000000 steps  (68%)
[18:42:34] Completed 690000 out of 1000000 steps  (69%)
[19:24:32] Completed 700000 out of 1000000 steps  (70%)
[20:35:49] Completed 710000 out of 1000000 steps  (71%)
[21:45:00] Completed 720000 out of 1000000 steps  (72%)
[22:20:06] Completed 730000 out of 1000000 steps  (73%)
[23:23:16] - Autosending finished units... [February 18 23:23:16 UTC]
[23:23:16] Trying to send all finished work units
[23:23:16] + No unsent completed units remaining.
[23:23:16] - Autosend completed
[23:24:01] Completed 740000 out of 1000000 steps  (74%)
[00:28:49] Completed 750000 out of 1000000 steps  (75%)
[01:29:31] Completed 760000 out of 1000000 steps  (76%)
[01:41:56] Completed 770000 out of 1000000 steps  (77%)
[02:13:02] Completed 780000 out of 1000000 steps  (78%)
[03:04:32] Completed 790000 out of 1000000 steps  (79%)
[04:54:29] Completed 800000 out of 1000000 steps  (80%)
[05:23:16] - Autosending finished units... [February 19 05:23:16 UTC]
[05:23:16] Trying to send all finished work units
[05:23:16] + No unsent completed units remaining.
[05:23:16] - Autosend completed
[07:45:04] Completed 810000 out of 1000000 steps  (81%)
[09:08:11] Completed 820000 out of 1000000 steps  (82%)
[09:15:10] Completed 830000 out of 1000000 steps  (83%)
[09:22:01] Completed 840000 out of 1000000 steps  (84%)
[09:29:14] Completed 850000 out of 1000000 steps  (85%)
[09:36:16] Completed 860000 out of 1000000 steps  (86%)
[09:42:49] Completed 870000 out of 1000000 steps  (87%)
[09:49:23] Completed 880000 out of 1000000 steps  (88%)
[10:00:02] Completed 890000 out of 1000000 steps  (89%)
[10:06:35] Completed 900000 out of 1000000 steps  (90%)
[10:13:08] Completed 910000 out of 1000000 steps  (91%)
[10:19:41] Completed 920000 out of 1000000 steps  (92%)
[10:26:14] Completed 930000 out of 1000000 steps  (93%)
[10:32:46] Completed 940000 out of 1000000 steps  (94%)
[10:39:18] Completed 950000 out of 1000000 steps  (95%)
[10:45:50] Completed 960000 out of 1000000 steps  (96%)
[10:52:21] Completed 970000 out of 1000000 steps  (97%)
[10:58:55] Completed 980000 out of 1000000 steps  (98%)
[11:05:28] Completed 990000 out of 1000000 steps  (99%)
[11:12:00] Completed 1000000 out of 1000000 steps  (100%)
[11:12:00] DynamicWrapper: Finished Work Unit: sleep=10000
[11:12:11] 
[11:12:11] Finished Work Unit:
[11:12:11] - Reading up to 9338472 from "work/wudata_06.trr": Read 9338472
[11:12:11] trr file hash check passed.
[11:12:11] - Reading up to 1413596 from "work/wudata_06.xtc": Read 1413596
[11:12:11] xtc file hash check passed.
[11:12:11] edr file hash check passed.
[11:12:11] logfile size: 50525
[11:12:11] Leaving Run
[11:12:15] - Writing 10810105 bytes of core data to disk...
[11:12:18] Done: 10809593 -> 10300931 (compressed to 95.2 percent)
[11:12:18]   ... Done.
[11:12:19] - Shutting down core
[11:12:19] 
[11:12:19] Folding@home Core Shutdown: FINISHED_UNIT
[11:12:22] CoreStatus = 64 (100)
[11:12:22] Unit 6 finished with 96 percent of time to deadline remaining.
[11:12:22] Updated performance fraction: 0.961413
[11:12:22] Sending work to server
[11:12:22] Project: 11041 (Run 0, Clone 897, Gen 29)


[11:12:22] + Attempting to send results [February 19 11:12:22 UTC]
[11:12:22] - Reading file work/wuresults_06.dat from core
[11:12:22]   (Read 10301443 bytes from disk)
[11:12:22] Connecting to http://171.64.65.55:80/
[11:13:48] Posted data.
[11:13:48] Initial: 0000; - Uploaded at ~116 kB/s
[11:13:48] - Averaged speed for that direction ~101 kB/s
[11:13:48] + Results successfully sent
[11:13:48] Thank you for your contribution to Folding@Home.
[11:13:48] + Number of Units Completed: 476

[11:13:53] Trying to send all finished work units
[11:13:53] + No unsent completed units remaining.
[11:13:53] - Preparing to get new work unit...
[11:13:53] Cleaning up work directory
[11:13:53] + Attempting to get work packet
[11:13:53] Passkey found
[11:13:53] - Will indicate memory of 4095 MB
[11:13:53] - Connecting to assignment server
[11:13:53] Connecting to http://assign.stanford.edu:8080/
[11:13:53] - Couldn't send HTTP request to server
[11:13:53]   (Got status 403)
[11:13:53] + Could not connect to Assignment Server
[11:13:53] Connecting to http://assign2.stanford.edu:80/
[11:13:54] Posted data.
[11:13:54] Initial: 40AB; - Successful: assigned to (171.64.65.55).
[11:13:54] + News From Folding@Home: Welcome to Folding@Home
[11:13:54] Loaded queue successfully.
[11:13:54] Sent data
[11:13:54] Connecting to http://171.64.65.55:80/
[11:13:55] Posted data.
[11:13:55] Initial: 0000; - Receiving payload (expected size: 925512)
[11:13:58] - Downloaded at ~301 kB/s
[11:13:58] - Averaged speed for that direction ~335 kB/s
[11:13:58] + Received work.
[11:13:58] Trying to send all finished work units
[11:13:58] + No unsent completed units remaining.
[11:13:58] + Closed connections
[11:13:58] 
[11:13:58] + Processing work unit
[11:13:58] Core required: FahCore_a3.exe
[11:13:58] Core found.
[11:13:58] Working on queue slot 07 [February 19 11:13:58 UTC]
[11:13:58] + Working ...
[11:13:58] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 07 -np 4 -nocpulock -checkpoint 4 -verbose -lifeline 3608 -version 634'

[11:13:58] 
[11:13:58] *------------------------------*
[11:13:58] Folding@Home Gromacs SMP Core
[11:13:58] Version 2.27 (Dec. 15, 2010)
[11:13:58] 
[11:13:58] Preparing to commence simulation
[11:13:58] - Looking at optimizations...
[11:13:58] - Created dyn
[11:13:58] - Files status OK
[11:13:59] - Expanded 925000 -> 1378244 (decompressed 148.9 percent)
[11:13:59] Called DecompressByteArray: compressed_data_size=925000 data_size=1378244, decompressed_data_size=1378244 diff=0
[11:13:59] - Digital signature verified
[11:13:59] 
[11:13:59] Project: 11041 (Run 0, Clone 833, Gen 30)
[11:13:59] 
[11:13:59] Assembly optimizations on if available.
[11:13:59] Entering M.D.
[11:14:04] Mapping NT from 4 to 4 
[11:14:05] Completed 0 out of 1000000 steps  (0%)
[11:20:40] Completed 10000 out of 1000000 steps  (1%)
[11:22:56] - Autosending finished units... [February 19 11:22:56 UTC]
[11:22:56] Trying to send all finished work units
[11:22:56] + No unsent completed units remaining.
[11:22:56] - Autosend completed
[11:27:17] Completed 20000 out of 1000000 steps  (2%)
[11:33:49] Completed 30000 out of 1000000 steps  (3%)
[11:40:21] Completed 40000 out of 1000000 steps  (4%)
[11:46:54] Completed 50000 out of 1000000 steps  (5%)
[11:53:26] Completed 60000 out of 1000000 steps  (6%)
[12:00:00] Completed 70000 out of 1000000 steps  (7%)
[12:06:33] Completed 80000 out of 1000000 steps  (8%)
[12:13:05] Completed 90000 out of 1000000 steps  (9%)
[12:19:38] Completed 100000 out of 1000000 steps  (10%)
[12:26:12] Completed 110000 out of 1000000 steps  (11%)
[12:32:45] Completed 120000 out of 1000000 steps  (12%)
[12:39:18] Completed 130000 out of 1000000 steps  (13%)
[12:45:52] Completed 140000 out of 1000000 steps  (14%)
[12:52:25] Completed 150000 out of 1000000 steps  (15%)
[12:59:00] Completed 160000 out of 1000000 steps  (16%)
[13:05:32] Completed 170000 out of 1000000 steps  (17%)
[13:12:03] Completed 180000 out of 1000000 steps  (18%)
[13:18:36] Completed 190000 out of 1000000 steps  (19%)
[13:25:10] Completed 200000 out of 1000000 steps  (20%)
[13:31:43] Completed 210000 out of 1000000 steps  (21%)
[13:38:15] Completed 220000 out of 1000000 steps  (22%)
[13:44:47] Completed 230000 out of 1000000 steps  (23%)
[13:51:18] Completed 240000 out of 1000000 steps  (24%)
[13:57:52] Completed 250000 out of 1000000 steps  (25%)
[14:04:25] Completed 260000 out of 1000000 steps  (26%)
[14:10:56] Completed 270000 out of 1000000 steps  (27%)
[14:17:27] Completed 280000 out of 1000000 steps  (28%)
[14:23:59] Completed 290000 out of 1000000 steps  (29%)
[14:30:34] Completed 300000 out of 1000000 steps  (30%)
[14:37:05] Completed 310000 out of 1000000 steps  (31%)
[14:43:37] Completed 320000 out of 1000000 steps  (32%)
[14:50:08] Completed 330000 out of 1000000 steps  (33%)
[14:56:42] Completed 340000 out of 1000000 steps  (34%)
[15:03:16] Completed 350000 out of 1000000 steps  (35%)
[15:09:48] Completed 360000 out of 1000000 steps  (36%)
[15:16:20] Completed 370000 out of 1000000 steps  (37%)
[15:22:51] Completed 380000 out of 1000000 steps  (38%)
[15:29:25] Completed 390000 out of 1000000 steps  (39%)
[15:35:58] Completed 400000 out of 1000000 steps  (40%)
[15:42:32] Completed 410000 out of 1000000 steps  (41%)
[15:49:04] Completed 420000 out of 1000000 steps  (42%)
[15:55:37] Completed 430000 out of 1000000 steps  (43%)
[16:02:11] Completed 440000 out of 1000000 steps  (44%)
[16:08:46] Completed 450000 out of 1000000 steps  (45%)
[16:15:18] Completed 460000 out of 1000000 steps  (46%)
[16:21:49] Completed 470000 out of 1000000 steps  (47%)
[16:28:23] Completed 480000 out of 1000000 steps  (48%)
[16:34:56] Completed 490000 out of 1000000 steps  (49%)
[16:41:28] Completed 500000 out of 1000000 steps  (50%)
[16:48:02] Completed 510000 out of 1000000 steps  (51%)
[16:54:36] Completed 520000 out of 1000000 steps  (52%)
[17:01:08] Completed 530000 out of 1000000 steps  (53%)
[17:07:43] Completed 540000 out of 1000000 steps  (54%)
[17:14:21] Completed 550000 out of 1000000 steps  (55%)
[17:20:59] Completed 560000 out of 1000000 steps  (56%)
[17:22:56] - Autosending finished units... [February 19 17:22:56 UTC]
[17:22:56] Trying to send all finished work units
[17:22:56] + No unsent completed units remaining.
[17:22:56] - Autosend completed
[17:27:43] Completed 570000 out of 1000000 steps  (57%)
[17:34:20] Completed 580000 out of 1000000 steps  (58%)
[17:38:58] Killing all core threads
[17:38:58] Could not get process id information.  Please kill core process manually

Folding@Home Client Shutdown at user request.
[17:38:58] ***** Got a SIGTERM signal (2)
[17:38:58] Killing all core threads
[17:38:58] Could not get process id information.  Please kill core process manually

Folding@Home Client Shutdown.


--- Opening Log file [February 19 18:24:35 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.34

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: D:\Back-up-August2011crash\Folding@Home Windows SMP Client V1.01
Executable: D:\Back-up-August2011crash\Folding@Home Windows SMP Client V1.01\FAH6.34-win32-SMP.exe
Arguments: -smp 4 -verbosity 9 

[18:24:36] - Ask before connecting: No
[18:24:36] - User name: Overvoltage (Team 11314)
[18:24:36] - User ID: 1CEAE09A7D80A5A1
[18:24:36] - Machine ID: 1
[18:24:36] 
[18:24:36] Loaded queue successfully.
[18:24:36] 
[18:24:36] - Autosending finished units... [February 19 18:24:36 UTC]
[18:24:36] + Processing work unit
[18:24:36] Trying to send all finished work units
[18:24:36] Core required: FahCore_a3.exe
[18:24:36] + No unsent completed units remaining.
[18:24:36] Core found.
[18:24:36] - Autosend completed
[18:24:36] Working on queue slot 07 [February 19 18:24:36 UTC]
[18:24:36] + Working ...
[18:24:36] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 07 -np 4 -nocpulock -checkpoint 4 -verbose -lifeline 1168 -version 634'

[18:24:36] 
[18:24:36] *------------------------------*
[18:24:36] Folding@Home Gromacs SMP Core
[18:24:36] Version 2.27 (Dec. 15, 2010)
[18:24:36] 
[18:24:36] Preparing to commence simulation
[18:24:36] - Ensuring status. Please wait.
[18:24:45] - Looking at optimizations...
[18:24:45] - Working with standard loops on this execution.
[18:24:45] - Previous termination of core was improper.
[18:24:45] - Files status OK
[18:24:46] - Expanded 925000 -> 1378244 (decompressed 148.9 percent)
[18:24:46] Called DecompressByteArray: compressed_data_size=925000 data_size=1378244, decompressed_data_size=1378244 diff=0
[18:24:46] - Digital signature verified
[18:24:46] 
[18:24:46] Project: 11041 (Run 0, Clone 833, Gen 30)
[18:24:46] 
[18:24:46] Entering M.D.
[18:24:52] Using Gromacs checkpoints
[18:24:52] Mapping NT from 4 to 4 
[18:24:53] Resuming from checkpoint
[18:24:53] Verified work/wudata_07.log
[18:24:54] Verified work/wudata_07.trr
[18:24:54] Verified work/wudata_07.xtc
[18:24:54] Verified work/wudata_07.edr
[18:24:54] Completed 585470 out of 1000000 steps  (58%)
[18:28:31] Completed 590000 out of 1000000 steps  (59%)
[18:37:07] Completed 600000 out of 1000000 steps  (60%)
[18:37:25] Killing all core threads
[18:37:25] Could not get process id information.  Please kill core process manually

Folding@Home Client Shutdown at user request.
[18:37:25] ***** Got a SIGTERM signal (2)
[18:37:25] Killing all core threads
[18:37:25] Could not get process id information.  Please kill core process manually

Folding@Home Client Shutdown.


--- Opening Log file [February 19 18:38:34 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.34

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: D:\Back-up-August2011crash\Folding@Home Windows SMP Client V1.01
Executable: D:\Back-up-August2011crash\Folding@Home Windows SMP Client V1.01\FAH6.34-win32-SMP.exe
Arguments: -smp 4 -verbosity 9 

[18:38:34] - Ask before connecting: No
[18:38:34] - User name: Overvoltage (Team 11314)
[18:38:34] - User ID: 1CEAE09A7D80A5A1
[18:38:34] - Machine ID: 1
[18:38:34] 
[18:38:34] Loaded queue successfully.
[18:38:34] 
[18:38:34] - Autosending finished units... [February 19 18:38:34 UTC]
[18:38:34] + Processing work unit
[18:38:34] Trying to send all finished work units
[18:38:34] Core required: FahCore_a3.exe
[18:38:34] + No unsent completed units remaining.
[18:38:34] Core found.
[18:38:34] - Autosend completed
[18:38:34] Working on queue slot 07 [February 19 18:38:34 UTC]
[18:38:34] + Working ...
[18:38:34] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 07 -np 4 -nocpulock -checkpoint 4 -verbose -lifeline 4060 -version 634'

[18:38:34] 
[18:38:34] *------------------------------*
[18:38:34] Folding@Home Gromacs SMP Core
[18:38:34] Version 2.27 (Dec. 15, 2010)
[18:38:34] 
[18:38:34] Preparing to commence simulation
[18:38:34] - Ensuring status. Please wait.
[18:38:44] - Looking at optimizations...
[18:38:44] - Working with standard loops on this execution.
[18:38:44] - Previous termination of core was improper.
[18:38:44] - Going to use standard loops.
[18:38:44] - Files status OK
[18:38:44] - Expanded 925000 -> 1378244 (decompressed 148.9 percent)
[18:38:44] Called DecompressByteArray: compressed_data_size=925000 data_size=1378244, decompressed_data_size=1378244 diff=0
[18:38:44] - Digital signature verified
[18:38:44] 
[18:38:44] Project: 11041 (Run 0, Clone 833, Gen 30)
[18:38:44] 
[18:38:44] Entering M.D.
[18:38:50] Using Gromacs checkpoints
[18:38:50] Mapping NT from 4 to 4 
[18:39:41] Resuming from checkpoint
[18:39:41] Verified work/wudata_07.log
[18:39:41] Verified work/wudata_07.trr
[18:39:41] Verified work/wudata_07.xtc
[18:39:41] Verified work/wudata_07.edr
[18:39:41] Completed 599750 out of 1000000 steps  (59%)
[18:39:53] Completed 600000 out of 1000000 steps  (60%)
[18:46:11] Completed 610000 out of 1000000 steps  (61%)
[20:29:52] Completed 620000 out of 1000000 steps  (62%)
[20:39:51] Completed 630000 out of 1000000 steps  (63%)
[20:55:13] Completed 640000 out of 1000000 steps  (64%)
[21:07:45] Completed 650000 out of 1000000 steps  (65%)
[21:30:04] Completed 660000 out of 1000000 steps  (66%)
[22:06:54] Completed 670000 out of 1000000 steps  (67%)
[22:38:53] Completed 680000 out of 1000000 steps  (68%)
[22:55:14] Completed 690000 out of 1000000 steps  (69%)
[23:17:00] Completed 700000 out of 1000000 steps  (70%)
[23:40:55] Completed 710000 out of 1000000 steps  (71%)
[00:04:39] Completed 720000 out of 1000000 steps  (72%)
[00:31:21] Completed 730000 out of 1000000 steps  (73%)
[00:38:34] - Autosending finished units... [February 20 00:38:34 UTC]
[00:38:34] Trying to send all finished work units
[00:38:34] + No unsent completed units remaining.
[00:38:34] - Autosend completed
[00:48:14] Completed 740000 out of 1000000 steps  (74%)
[01:11:57] Completed 750000 out of 1000000 steps  (75%)
[02:00:26] Completed 760000 out of 1000000 steps  (76%)
[02:13:57] Completed 770000 out of 1000000 steps  (77%)
[03:15:00] Completed 780000 out of 1000000 steps  (78%)
[04:14:58] Completed 790000 out of 1000000 steps  (79%)
[05:15:06] Completed 800000 out of 1000000 steps  (80%)
[05:44:49] Completed 810000 out of 1000000 steps  (81%)
[06:21:03] Completed 820000 out of 1000000 steps  (82%)
[06:38:34] - Autosending finished units... [February 20 06:38:34 UTC]
[06:38:34] Trying to send all finished work units
[06:38:34] + No unsent completed units remaining.
[06:38:34] - Autosend completed
[06:41:07] Completed 830000 out of 1000000 steps  (83%)
[06:47:18] Completed 840000 out of 1000000 steps  (84%)
[06:54:07] Completed 850000 out of 1000000 steps  (85%)
[07:01:20] Completed 860000 out of 1000000 steps  (86%)
[07:12:16] Completed 870000 out of 1000000 steps  (87%)
[07:19:05] Completed 880000 out of 1000000 steps  (88%)
[07:25:10] Completed 890000 out of 1000000 steps  (89%)
[07:31:12] Completed 900000 out of 1000000 steps  (90%)
[07:38:54] Completed 910000 out of 1000000 steps  (91%)
[07:46:44] Completed 920000 out of 1000000 steps  (92%)
[07:54:18] Completed 930000 out of 1000000 steps  (93%)
[08:01:41] Completed 940000 out of 1000000 steps  (94%)
[08:09:19] Completed 950000 out of 1000000 steps  (95%)
[08:21:53] Completed 960000 out of 1000000 steps  (96%)
[08:29:11] Completed 970000 out of 1000000 steps  (97%)
[08:36:30] Completed 980000 out of 1000000 steps  (98%)
[08:43:45] Completed 990000 out of 1000000 steps  (99%)
[08:51:02] Completed 1000000 out of 1000000 steps  (100%)
[08:51:03] DynamicWrapper: Finished Work Unit: sleep=10000
[08:51:13] 
[08:51:13] Finished Work Unit:
[08:51:13] - Reading up to 9338472 from "work/wudata_07.trr": Read 9338472
[08:51:13] trr file hash check passed.
[08:51:13] - Reading up to 1414724 from "work/wudata_07.xtc": Read 1414724
[08:51:14] xtc file hash check passed.
[08:51:14] edr file hash check passed.
[08:51:14] logfile size: 48009
[08:51:14] Leaving Run
[08:51:17] - Writing 10808717 bytes of core data to disk...
[08:51:20] Done: 10808205 -> 10303020 (compressed to 95.3 percent)
[08:51:20]   ... Done.
[08:51:21] - Shutting down core
[08:51:21] 
[08:51:21] Folding@home Core Shutdown: FINISHED_UNIT
[08:51:24] CoreStatus = 64 (100)
[08:51:24] Unit 7 finished with 96 percent of time to deadline remaining.
[08:51:24] Updated performance fraction: 0.961622
[08:51:24] Sending work to server
[08:51:24] Project: 11041 (Run 0, Clone 833, Gen 30)


[08:51:24] + Attempting to send results [February 20 08:51:24 UTC]
[08:51:24] - Reading file work/wuresults_07.dat from core
[08:51:24]   (Read 10303532 bytes from disk)
[08:51:24] Connecting to http://171.64.65.55:80/
[08:52:52] Posted data.
[08:52:52] Initial: 0000; - Uploaded at ~114 kB/s
[08:52:52] - Averaged speed for that direction ~104 kB/s
[08:52:52] + Results successfully sent
[08:52:52] Thank you for your contribution to Folding@Home.
[08:52:52] + Number of Units Completed: 477

[08:52:56] Trying to send all finished work units
[08:52:56] + No unsent completed units remaining.
[08:52:56] - Preparing to get new work unit...
[08:52:56] Cleaning up work directory
[08:52:56] + Attempting to get work packet
[08:52:56] Passkey found
[08:52:56] - Will indicate memory of 4095 MB
[08:52:56] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 15, Stepping: 7
[08:52:56] - Connecting to assignment server
[08:52:56] Connecting to http://assign.stanford.edu:8080/
[08:52:58] - Couldn't send HTTP request to server
[08:52:58]   (Got status 403)
[08:52:58] + Could not connect to Assignment Server
[08:52:58] Connecting to http://assign2.stanford.edu:80/
[08:52:58] Posted data.
[08:52:58] Initial: 40AB; - Successful: assigned to (171.64.65.55).
[08:52:58] + News From Folding@Home: Welcome to Folding@Home
[08:52:59] Loaded queue successfully.
[08:52:59] Sent data
[08:52:59] Connecting to http://171.64.65.55:80/
[08:53:00] Posted data.
[08:53:00] Initial: 0000; - Receiving payload (expected size: 660401)
[08:53:01] - Downloaded at ~644 kB/s
[08:53:01] - Averaged speed for that direction ~397 kB/s
[08:53:01] + Received work.
[08:53:01] Trying to send all finished work units
[08:53:01] + No unsent completed units remaining.
[08:53:01] + Closed connections
[08:53:01] 
[08:53:01] + Processing work unit
[08:53:01] Core required: FahCore_a3.exe
[08:53:01] Core found.
[08:53:01] Working on queue slot 08 [February 20 08:53:01 UTC]
[08:53:01] + Working ...
[08:53:01] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 08 -np 4 -nocpulock -checkpoint 4 -verbose -lifeline 4060 -version 634'

[08:53:01] 
[08:53:01] *------------------------------*
[08:53:01] Folding@Home Gromacs SMP Core
[08:53:01] Version 2.27 (Dec. 15, 2010)
[08:53:01] 
[08:53:01] Preparing to commence simulation
[08:53:01] - Looking at optimizations...
[08:53:01] - Created dyn
[08:53:01] - Files status OK
[08:53:01] - Expanded 659889 -> 1092080 (decompressed 165.4 percent)
[08:53:01] Called DecompressByteArray: compressed_data_size=659889 data_size=1092080, decompressed_data_size=1092080 diff=0
[08:53:01] - Digital signature verified
[08:53:01] 
[08:53:01] Project: 11070 (Run 653, Clone 0, Gen 31)
[08:53:01] 
[08:53:02] Assembly optimizations on if available.
[08:53:02] Entering M.D.
[08:53:07] Mapping NT from 4 to 4 
[08:53:07] Completed 0 out of 1000000 steps  (0%)
[08:58:28] Completed 10000 out of 1000000 steps  (1%)
[09:03:38] Completed 20000 out of 1000000 steps  (2%)
[09:08:48] Completed 30000 out of 1000000 steps  (3%)
[09:13:57] Completed 40000 out of 1000000 steps  (4%)
[09:19:08] Completed 50000 out of 1000000 steps  (5%)
[09:24:17] Completed 60000 out of 1000000 steps  (6%)
[09:29:28] Completed 70000 out of 1000000 steps  (7%)
[09:34:38] Completed 80000 out of 1000000 steps  (8%)
[09:39:50] Completed 90000 out of 1000000 steps  (9%)
[09:44:59] Completed 100000 out of 1000000 steps  (10%)
[09:50:12] Completed 110000 out of 1000000 steps  (11%)
[09:55:23] Completed 120000 out of 1000000 steps  (12%)
[10:00:25] Completed 130000 out of 1000000 steps  (13%)
[10:05:19] Completed 140000 out of 1000000 steps  (14%)
[10:10:29] Completed 150000 out of 1000000 steps  (15%)
[10:15:34] Completed 160000 out of 1000000 steps  (16%)
[10:20:42] Completed 170000 out of 1000000 steps  (17%)
[10:25:49] Completed 180000 out of 1000000 steps  (18%)
[10:30:56] Completed 190000 out of 1000000 steps  (19%)
[10:36:03] Completed 200000 out of 1000000 steps  (20%)
[10:41:12] Completed 210000 out of 1000000 steps  (21%)
[10:46:19] Completed 220000 out of 1000000 steps  (22%)
[10:51:25] Completed 230000 out of 1000000 steps  (23%)
[10:56:32] Completed 240000 out of 1000000 steps  (24%)
[11:01:41] Completed 250000 out of 1000000 steps  (25%)
[11:10:45] Completed 260000 out of 1000000 steps  (26%)
[11:15:55] Completed 270000 out of 1000000 steps  (27%)
[11:21:04] Completed 280000 out of 1000000 steps  (28%)
[11:26:14] Completed 290000 out of 1000000 steps  (29%)
[11:31:24] Completed 300000 out of 1000000 steps  (30%)
[11:36:36] Completed 310000 out of 1000000 steps  (31%)
[11:41:46] Completed 320000 out of 1000000 steps  (32%)
[11:46:56] Completed 330000 out of 1000000 steps  (33%)
[11:52:07] Completed 340000 out of 1000000 steps  (34%)
[11:57:18] Completed 350000 out of 1000000 steps  (35%)
[12:02:30] Completed 360000 out of 1000000 steps  (36%)
[12:07:48] Completed 370000 out of 1000000 steps  (37%)
[12:12:57] Completed 380000 out of 1000000 steps  (38%)
[12:18:07] Completed 390000 out of 1000000 steps  (39%)
[12:23:16] Completed 400000 out of 1000000 steps  (40%)
[12:28:25] Completed 410000 out of 1000000 steps  (41%)
[12:33:33] Completed 420000 out of 1000000 steps  (42%)
[12:38:22] Completed 430000 out of 1000000 steps  (43%)
[12:38:34] - Autosending finished units... [February 20 12:38:34 UTC]
[12:38:34] Trying to send all finished work units
[12:38:34] + No unsent completed units remaining.
[12:38:34] - Autosend completed
[12:43:29] Completed 440000 out of 1000000 steps  (44%)
[12:48:41] Completed 450000 out of 1000000 steps  (45%)
[12:53:47] Completed 460000 out of 1000000 steps  (46%)
[12:58:54] Completed 470000 out of 1000000 steps  (47%)
[13:04:01] Completed 480000 out of 1000000 steps  (48%)
[13:09:08] Completed 490000 out of 1000000 steps  (49%)
[13:14:14] Completed 500000 out of 1000000 steps  (50%)
[13:19:21] Completed 510000 out of 1000000 steps  (51%)
[13:24:28] Completed 520000 out of 1000000 steps  (52%)
[13:29:35] Completed 530000 out of 1000000 steps  (53%)
[13:34:43] Completed 540000 out of 1000000 steps  (54%)
[13:39:52] Completed 550000 out of 1000000 steps  (55%)
[13:45:00] Completed 560000 out of 1000000 steps  (56%)
[13:50:09] Completed 570000 out of 1000000 steps  (57%)
[13:55:18] Completed 580000 out of 1000000 steps  (58%)
[14:00:27] Completed 590000 out of 1000000 steps  (59%)
[14:05:37] Completed 600000 out of 1000000 steps  (60%)
[14:10:46] Completed 610000 out of 1000000 steps  (61%)
[14:15:52] Completed 620000 out of 1000000 steps  (62%)
[14:21:01] Completed 630000 out of 1000000 steps  (63%)
[14:26:07] Completed 640000 out of 1000000 steps  (64%)
[14:31:14] Completed 650000 out of 1000000 steps  (65%)
[14:36:22] Completed 660000 out of 1000000 steps  (66%)
[14:41:30] Completed 670000 out of 1000000 steps  (67%)
[14:46:39] Completed 680000 out of 1000000 steps  (68%)
[14:51:46] Completed 690000 out of 1000000 steps  (69%)
[14:56:57] Completed 700000 out of 1000000 steps  (70%)
[15:02:06] Completed 710000 out of 1000000 steps  (71%)
[15:09:30] Completed 720000 out of 1000000 steps  (72%)
[15:14:41] Completed 730000 out of 1000000 steps  (73%)
[15:19:50] Completed 740000 out of 1000000 steps  (74%)
[15:24:57] Completed 750000 out of 1000000 steps  (75%)
[15:30:06] Completed 760000 out of 1000000 steps  (76%)
[15:35:14] Completed 770000 out of 1000000 steps  (77%)
[15:40:24] Completed 780000 out of 1000000 steps  (78%)
[15:45:36] Completed 790000 out of 1000000 steps  (79%)
[15:50:45] Completed 800000 out of 1000000 steps  (80%)
[15:55:52] Completed 810000 out of 1000000 steps  (81%)
[16:01:03] Completed 820000 out of 1000000 steps  (82%)
[16:06:12] Completed 830000 out of 1000000 steps  (83%)
[16:11:20] Completed 840000 out of 1000000 steps  (84%)
[16:16:29] Completed 850000 out of 1000000 steps  (85%)
[16:21:37] Completed 860000 out of 1000000 steps  (86%)
[16:26:46] Completed 870000 out of 1000000 steps  (87%)
[16:31:53] Completed 880000 out of 1000000 steps  (88%)
[16:37:02] Completed 890000 out of 1000000 steps  (89%)
[16:42:11] Completed 900000 out of 1000000 steps  (90%)
[16:47:24] Completed 910000 out of 1000000 steps  (91%)
[16:52:39] Completed 920000 out of 1000000 steps  (92%)
[16:57:52] Completed 930000 out of 1000000 steps  (93%)
[17:03:01] Completed 940000 out of 1000000 steps  (94%)
[17:08:16] Completed 950000 out of 1000000 steps  (95%)
[17:14:22] Completed 960000 out of 1000000 steps  (96%)
[17:20:22] Completed 970000 out of 1000000 steps  (97%)
[17:25:39] Completed 980000 out of 1000000 steps  (98%)
[17:31:00] Completed 990000 out of 1000000 steps  (99%)
[17:36:19] Completed 1000000 out of 1000000 steps  (100%)
[17:36:20] DynamicWrapper: Finished Work Unit: sleep=10000
[17:36:29] 
[17:36:29] Finished Work Unit:
[17:36:29] - Reading up to 6652008 from "work/wudata_08.trr": Read 6652008
[17:36:29] trr file hash check passed.
[17:36:29] - Reading up to 998956 from "work/wudata_08.xtc": Read 998956
[17:36:29] xtc file hash check passed.
[17:36:29] edr file hash check passed.
[17:36:29] logfile size: 34167
[17:36:29] Leaving Run
[17:36:34] - Writing 7692495 bytes of core data to disk...
[17:36:36] Done: 7691983 -> 7351102 (compressed to 95.5 percent)
[17:36:36]   ... Done.
[17:36:36] - Shutting down core
[17:36:36] 
[17:36:36] Folding@home Core Shutdown: FINISHED_UNIT
[17:36:40] CoreStatus = 64 (100)
[17:36:40] Unit 8 finished with 97 percent of time to deadline remaining.
[17:36:40] Updated performance fraction: 0.963237
[17:36:40] Sending work to server
[17:36:40] Project: 11070 (Run 653, Clone 0, Gen 31)


[17:36:40] + Attempting to send results [February 20 17:36:40 UTC]
[17:36:40] - Reading file work/wuresults_08.dat from core
[17:36:40]   (Read 7351614 bytes from disk)
[17:36:40] Connecting to http://171.64.65.55:80/
[17:37:43] Posted data.
[17:37:43] Initial: 0000; - Uploaded at ~113 kB/s
[17:37:43] - Averaged speed for that direction ~106 kB/s
[17:37:43] + Results successfully sent
[17:37:43] Thank you for your contribution to Folding@Home.
[17:37:43] + Number of Units Completed: 478

[17:37:48] Trying to send all finished work units
[17:37:48] + No unsent completed units remaining.
[17:37:48] - Preparing to get new work unit...
[17:37:48] Cleaning up work directory
[17:37:48] + Attempting to get work packet
[17:37:48] Passkey found
[17:37:48] - Will indicate memory of 4095 MB
[17:37:48] - Connecting to assignment server
[17:37:48] Connecting to http://assign.stanford.edu:8080/
[17:37:48] - Couldn't send HTTP request to server
[17:37:48]   (Got status 403)
[17:37:48] + Could not connect to Assignment Server
[17:37:48] Connecting to http://assign2.stanford.edu:80/
[17:37:49] Posted data.
[17:37:49] Initial: 40AB; - Successful: assigned to (171.64.65.55).
[17:37:49] + News From Folding@Home: Welcome to Folding@Home
[17:37:49] Loaded queue successfully.
[17:37:49] Sent data
[17:37:49] Connecting to http://171.64.65.55:80/
[17:37:50] Posted data.
[17:37:50] Initial: 0000; - Receiving payload (expected size: 766856)
[17:37:52] - Downloaded at ~374 kB/s
[17:37:52] - Averaged speed for that direction ~392 kB/s
[17:37:52] + Received work.
[17:37:52] Trying to send all finished work units
[17:37:52] + No unsent completed units remaining.
[17:37:52] + Closed connections
[17:37:52] 
[17:37:52] + Processing work unit
[17:37:52] Core required: FahCore_a3.exe
[17:37:52] Core found.
[17:37:52] Working on queue slot 09 [February 20 17:37:52 UTC]
[17:37:52] + Working ...
[17:37:52] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 09 -np 4 -nocpulock -checkpoint 4 -verbose -lifeline 4060 -version 634'

[17:37:53] 
[17:37:53] *------------------------------*
[17:37:53] Folding@Home Gromacs SMP Core
[17:37:53] Version 2.27 (Dec. 15, 2010)
[17:37:53] 
[17:37:53] Preparing to commence simulation
[17:37:53] - Looking at optimizations...
[17:37:53] - Created dyn
[17:37:53] - Files status OK
[17:37:53] - Expanded 766344 -> 1204688 (decompressed 157.1 percent)
[17:37:53] Called DecompressByteArray: compressed_data_size=766344 data_size=1204688, decompressed_data_size=1204688 diff=0
[17:37:53] - Digital signature verified
[17:37:53] 
[17:37:53] Project: 11071 (Run 549, Clone 0, Gen 30)
[17:37:53] 
[17:37:53] Assembly optimizations on if available.
[17:37:53] Entering M.D.
[17:37:59] Mapping NT from 4 to 4 
[17:37:59] Completed 0 out of 1000000 steps  (0%)
[17:56:04] Completed 10000 out of 1000000 steps  (1%)
[18:02:26] Completed 20000 out of 1000000 steps  (2%)
[18:12:15] Completed 30000 out of 1000000 steps  (3%)
[18:18:21] Completed 40000 out of 1000000 steps  (4%)
[18:24:14] Completed 50000 out of 1000000 steps  (5%)
[18:30:23] Completed 60000 out of 1000000 steps  (6%)
[18:36:32] Completed 70000 out of 1000000 steps  (7%)
[18:38:34] - Autosending finished units... [February 20 18:38:34 UTC]
[18:38:34] Trying to send all finished work units
[18:38:34] + No unsent completed units remaining.
[18:38:34] - Autosend completed
[18:43:10] Completed 80000 out of 1000000 steps  (8%)
[18:49:41] Completed 90000 out of 1000000 steps  (9%)
[18:56:00] Completed 100000 out of 1000000 steps  (10%)
[19:02:20] Completed 110000 out of 1000000 steps  (11%)
[19:13:22] Completed 120000 out of 1000000 steps  (12%)
[19:21:14] Completed 130000 out of 1000000 steps  (13%)
[19:37:19] Completed 140000 out of 1000000 steps  (14%)
[19:43:45] Completed 150000 out of 1000000 steps  (15%)
[19:49:53] Completed 160000 out of 1000000 steps  (16%)
[20:00:04] Completed 170000 out of 1000000 steps  (17%)
[20:15:59] Completed 180000 out of 1000000 steps  (18%)
[20:35:20] Completed 190000 out of 1000000 steps  (19%)
[20:59:04] Completed 200000 out of 1000000 steps  (20%)
[21:24:03] Completed 210000 out of 1000000 steps  (21%)
[21:40:51] Completed 220000 out of 1000000 steps  (22%)
[21:50:50] Completed 230000 out of 1000000 steps  (23%)
[22:14:13] Completed 240000 out of 1000000 steps  (24%)
[22:45:21] Completed 250000 out of 1000000 steps  (25%)
[22:51:37] Completed 260000 out of 1000000 steps  (26%)
[22:57:58] Completed 270000 out of 1000000 steps  (27%)
[23:04:14] Completed 280000 out of 1000000 steps  (28%)
[23:15:28] Completed 290000 out of 1000000 steps  (29%)
[23:21:35] Completed 300000 out of 1000000 steps  (30%)
[23:28:05] Completed 310000 out of 1000000 steps  (31%)
[23:35:13] Completed 320000 out of 1000000 steps  (32%)
[23:50:51] Completed 330000 out of 1000000 steps  (33%)
[23:57:21] Completed 340000 out of 1000000 steps  (34%)
[00:03:57] Completed 350000 out of 1000000 steps  (35%)
[00:12:04] Completed 360000 out of 1000000 steps  (36%)
[00:19:45] Completed 370000 out of 1000000 steps  (37%)
[00:38:34] - Autosending finished units... [February 21 00:38:34 UTC]
[00:38:34] Trying to send all finished work units
[00:38:34] + No unsent completed units remaining.
[00:38:34] - Autosend completed
[00:56:40] Completed 380000 out of 1000000 steps  (38%)
[02:02:50] Completed 390000 out of 1000000 steps  (39%)
[02:45:58] Completed 400000 out of 1000000 steps  (40%)
[03:19:20] Completed 410000 out of 1000000 steps  (41%)
[04:15:34] Completed 420000 out of 1000000 steps  (42%)
[04:53:46] Completed 430000 out of 1000000 steps  (43%)
[05:28:14] Completed 440000 out of 1000000 steps  (44%)
[06:28:26] Completed 450000 out of 1000000 steps  (45%)
[06:38:34] - Autosending finished units... [February 21 06:38:34 UTC]
[06:38:34] Trying to send all finished work units
[06:38:34] + No unsent completed units remaining.
[06:38:34] - Autosend completed
[07:12:51] Completed 460000 out of 1000000 steps  (46%)
[08:12:26] Completed 470000 out of 1000000 steps  (47%)
[08:52:30] Completed 480000 out of 1000000 steps  (48%)
[08:57:34] Completed 490000 out of 1000000 steps  (49%)
[09:02:20] Completed 500000 out of 1000000 steps  (50%)
[09:07:15] Completed 510000 out of 1000000 steps  (51%)
[09:12:00] Completed 520000 out of 1000000 steps  (52%)
[09:16:48] Completed 530000 out of 1000000 steps  (53%)
[09:21:32] Completed 540000 out of 1000000 steps  (54%)
[09:26:19] Completed 550000 out of 1000000 steps  (55%)
[09:34:55] Completed 560000 out of 1000000 steps  (56%)
[09:39:41] Completed 570000 out of 1000000 steps  (57%)
[09:44:28] Completed 580000 out of 1000000 steps  (58%)
[09:49:17] Completed 590000 out of 1000000 steps  (59%)
[09:54:02] Completed 600000 out of 1000000 steps  (60%)
[09:59:00] Completed 610000 out of 1000000 steps  (61%)
[10:03:45] Completed 620000 out of 1000000 steps  (62%)
[10:08:30] Completed 630000 out of 1000000 steps  (63%)
[10:13:14] Completed 640000 out of 1000000 steps  (64%)
[10:18:01] Completed 650000 out of 1000000 steps  (65%)
[10:22:47] Completed 660000 out of 1000000 steps  (66%)
[10:27:32] Completed 670000 out of 1000000 steps  (67%)
[10:32:22] Completed 680000 out of 1000000 steps  (68%)
[10:37:12] Completed 690000 out of 1000000 steps  (69%)
[10:42:01] Completed 700000 out of 1000000 steps  (70%)
[10:46:50] Completed 710000 out of 1000000 steps  (71%)
[10:51:39] Completed 720000 out of 1000000 steps  (72%)
[10:56:28] Completed 730000 out of 1000000 steps  (73%)
[11:01:12] Completed 740000 out of 1000000 steps  (74%)
[11:05:58] Completed 750000 out of 1000000 steps  (75%)
[11:10:45] Completed 760000 out of 1000000 steps  (76%)
[11:15:31] Completed 770000 out of 1000000 steps  (77%)
[11:20:17] Completed 780000 out of 1000000 steps  (78%)
[11:25:02] Completed 790000 out of 1000000 steps  (79%)
[11:29:48] Completed 800000 out of 1000000 steps  (80%)
[11:34:31] Completed 810000 out of 1000000 steps  (81%)
[11:39:18] Completed 820000 out of 1000000 steps  (82%)
[11:44:03] Completed 830000 out of 1000000 steps  (83%)
[11:48:48] Completed 840000 out of 1000000 steps  (84%)
[11:53:34] Completed 850000 out of 1000000 steps  (85%)
[11:58:19] Completed 860000 out of 1000000 steps  (86%)
[12:03:06] Completed 870000 out of 1000000 steps  (87%)
[12:07:58] Completed 880000 out of 1000000 steps  (88%)
[12:12:43] Completed 890000 out of 1000000 steps  (89%)
[12:17:28] Completed 900000 out of 1000000 steps  (90%)
[12:22:14] Completed 910000 out of 1000000 steps  (91%)
[12:27:00] Completed 920000 out of 1000000 steps  (92%)
[12:31:47] Completed 930000 out of 1000000 steps  (93%)
[12:36:31] Completed 940000 out of 1000000 steps  (94%)
[12:38:34] - Autosending finished units... [February 21 12:38:34 UTC]
[12:38:34] Trying to send all finished work units
[12:38:34] + No unsent completed units remaining.
[12:38:34] - Autosend completed
[12:41:15] Completed 950000 out of 1000000 steps  (95%)
[12:46:01] Completed 960000 out of 1000000 steps  (96%)
[12:50:46] Completed 970000 out of 1000000 steps  (97%)
[12:55:32] Completed 980000 out of 1000000 steps  (98%)
[13:00:21] Completed 990000 out of 1000000 steps  (99%)
[13:05:10] Completed 1000000 out of 1000000 steps  (100%)
[13:05:10] DynamicWrapper: Finished Work Unit: sleep=10000
[13:05:20] 
[13:05:20] Finished Work Unit:
[13:05:20] - Reading up to 7890696 from "work/wudata_09.trr": Read 7890696
[13:05:21] trr file hash check passed.
[13:05:21] - Reading up to 1183924 from "work/wudata_09.xtc": Read 1183924
[13:05:21] xtc file hash check passed.
[13:05:21] edr file hash check passed.
[13:05:21] logfile size: 44571
[13:05:21] Leaving Run
[13:05:24] - Writing 9126555 bytes of core data to disk...
[13:05:26] Done: 9126043 -> 8708183 (compressed to 95.4 percent)
[13:05:26]   ... Done.
[13:05:27] - Shutting down core
[13:05:27] 
[13:05:27] Folding@home Core Shutdown: FINISHED_UNIT
[13:05:30] CoreStatus = 64 (100)
[13:05:30] Unit 9 finished with 93 percent of time to deadline remaining.
[13:05:30] Updated performance fraction: 0.957075
[13:05:30] Sending work to server
[13:05:30] Project: 11071 (Run 549, Clone 0, Gen 30)


[13:05:30] + Attempting to send results [February 21 13:05:30 UTC]
[13:05:30] - Reading file work/wuresults_09.dat from core
[13:05:30]   (Read 8708695 bytes from disk)
[13:05:30] Connecting to http://171.64.65.55:80/
[13:06:48] Posted data.
[13:06:48] Initial: 0000; - Uploaded at ~109 kB/s
[13:06:48] - Averaged speed for that direction ~106 kB/s
[13:06:48] + Results successfully sent
[13:06:48] Thank you for your contribution to Folding@Home.
[13:06:48] + Number of Units Completed: 479

[13:06:52] Trying to send all finished work units
[13:06:52] + No unsent completed units remaining.
[13:06:52] - Preparing to get new work unit...
[13:06:52] Cleaning up work directory
[13:06:52] + Attempting to get work packet
[13:06:52] Passkey found
[13:06:52] - Will indicate memory of 4095 MB
[13:06:52] - Connecting to assignment server
[13:06:52] Connecting to http://assign.stanford.edu:8080/
[13:06:53] - Couldn't send HTTP request to server
[13:06:53]   (Got status 403)
[13:06:53] + Could not connect to Assignment Server
[13:06:53] Connecting to http://assign2.stanford.edu:80/
[13:06:53] Posted data.
[13:06:53] Initial: 40AB; - Successful: assigned to (171.64.65.55).
[13:06:53] + News From Folding@Home: Welcome to Folding@Home
[13:06:54] Loaded queue successfully.
[13:06:54] Sent data
[13:06:54] Connecting to http://171.64.65.55:80/
[13:06:55] Posted data.
[13:06:55] Initial: 0000; - Receiving payload (expected size: 766697)
[13:06:56] - Downloaded at ~748 kB/s
[13:06:56] - Averaged speed for that direction ~464 kB/s
[13:06:56] + Received work.
[13:06:56] Trying to send all finished work units
[13:06:56] + No unsent completed units remaining.
[13:06:56] + Closed connections
[13:06:56] 
[13:06:56] + Processing work unit
[13:06:56] Core required: FahCore_a3.exe
[13:06:56] Core found.
[13:06:56] Working on queue slot 00 [February 21 13:06:56 UTC]
[13:06:56] + Working ...
[13:06:56] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 00 -np 4 -nocpulock -checkpoint 4 -verbose -lifeline 4060 -version 634'

[13:06:56] 
[13:06:56] *------------------------------*
[13:06:56] Folding@Home Gromacs SMP Core
[13:06:56] Version 2.27 (Dec. 15, 2010)
[13:06:56] 
[13:06:56] Preparing to commence simulation
[13:06:56] - Looking at optimizations...
[13:06:56] - Created dyn
[13:06:56] - Files status OK
[13:06:56] - Expanded 766185 -> 1204688 (decompressed 157.2 percent)
[13:06:56] Called DecompressByteArray: compressed_data_size=766185 data_size=1204688, decompressed_data_size=1204688 diff=0
[13:06:56] - Digital signature verified
[13:06:56] 
[13:06:56] Project: 11021 (Run 0, Clone 2182, Gen 31)
[13:06:56] 
[13:06:57] Assembly optimizations on if available.
[13:06:57] Entering M.D.
[13:07:03] Mapping NT from 4 to 4 
[13:07:03] Completed 0 out of 1000000 steps  (0%)
[13:11:51] Completed 10000 out of 1000000 steps  (1%)
[13:16:38] Completed 20000 out of 1000000 steps  (2%)
[13:21:24] Completed 30000 out of 1000000 steps  (3%)
[13:26:12] Completed 40000 out of 1000000 steps  (4%)
[13:30:58] Completed 50000 out of 1000000 steps  (5%)
[13:35:46] Completed 60000 out of 1000000 steps  (6%)
[13:40:33] Completed 70000 out of 1000000 steps  (7%)
[13:45:20] Completed 80000 out of 1000000 steps  (8%)
[13:50:08] Completed 90000 out of 1000000 steps  (9%)
[13:54:55] Completed 100000 out of 1000000 steps  (10%)
[13:59:43] Completed 110000 out of 1000000 steps  (11%)
[14:04:34] Completed 120000 out of 1000000 steps  (12%)
[14:09:22] Completed 130000 out of 1000000 steps  (13%)
[14:14:10] Completed 140000 out of 1000000 steps  (14%)
[14:18:58] Completed 150000 out of 1000000 steps  (15%)
[14:23:45] Completed 160000 out of 1000000 steps  (16%)
[14:28:36] Completed 170000 out of 1000000 steps  (17%)
[14:33:27] Completed 180000 out of 1000000 steps  (18%)
[14:38:15] Completed 190000 out of 1000000 steps  (19%)
[14:43:05] Completed 200000 out of 1000000 steps  (20%)
[14:47:54] Completed 210000 out of 1000000 steps  (21%)
[14:52:40] Completed 220000 out of 1000000 steps  (22%)
[14:57:27] Completed 230000 out of 1000000 steps  (23%)
[15:02:27] Completed 240000 out of 1000000 steps  (24%)
[15:07:47] Completed 250000 out of 1000000 steps  (25%)
[15:12:59] Completed 260000 out of 1000000 steps  (26%)
[15:19:14] Completed 270000 out of 1000000 steps  (27%)
[15:24:26] Completed 280000 out of 1000000 steps  (28%)
[15:29:31] Completed 290000 out of 1000000 steps  (29%)
[15:34:51] Completed 300000 out of 1000000 steps  (30%)
[15:40:03] Completed 310000 out of 1000000 steps  (31%)
[15:45:01] Completed 320000 out of 1000000 steps  (32%)
[15:50:12] Completed 330000 out of 1000000 steps  (33%)
[15:55:36] Completed 340000 out of 1000000 steps  (34%)
[16:01:00] Completed 350000 out of 1000000 steps  (35%)
[16:06:07] Completed 360000 out of 1000000 steps  (36%)
[16:11:13] Completed 370000 out of 1000000 steps  (37%)
[16:16:22] Completed 380000 out of 1000000 steps  (38%)
[16:19:04] Killing all core threads
[16:19:04] Could not get process id information.  Please kill core process manually

Folding@Home Client Shutdown at user request.
[16:19:04] ***** Got a SIGTERM signal (2)
[16:19:04] Killing all core threads
[16:19:04] Could not get process id information.  Please kill core process manually

Folding@Home Client Shutdown.

Code:

--- Opening Log file [February 21 08:53:31 UTC] 


# Windows GPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30r1

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: D:\Back-up-August2011crash\Folding@home-gpu
Executable: D:\Back-up-August2011crash\Folding@home-gpu\Folding@home-Win32-GPU.exe


[08:53:31] - Ask before connecting: No
[08:53:31] - User name: Overvoltage (Team 11314)
[08:53:31] - User ID: 1CEAE09A7D80A5A1
[08:53:31] - Machine ID: 2
[08:53:31] 
[08:53:31] Gpu type=3 species=30.
[08:53:31] Loaded queue successfully.
[08:53:31] - Preparing to get new work unit...
[08:53:31] Cleaning up work directory
[08:53:31] + Attempting to get work packet
[08:53:31] Passkey found
[08:53:31] Gpu type=3 species=30.
[08:53:31] - Connecting to assignment server
[08:53:31] - Couldn't send HTTP request to server
[08:53:31]   (Got status 403)
[08:53:31] + Could not connect to Assignment Server
[08:53:32] - Successful: assigned to (171.67.108.141).
[08:53:32] + News From Folding@Home: Welcome to Folding@Home
[08:53:32] Loaded queue successfully.
[08:53:32] Gpu type=3 species=30.
[08:53:35] - Couldn't send HTTP request to server
[08:53:35] + Could not connect to Work Server
[08:53:35] - Attempt #1  to get work failed, and no other work to do.
Waiting before retry.
[08:53:45] + Attempting to get work packet
[08:53:45] Passkey found
[08:53:45] Gpu type=3 species=30.
[08:53:45] - Connecting to assignment server
[08:53:45] - Couldn't send HTTP request to server
[08:53:45]   (Got status 403)
[08:53:45] + Could not connect to Assignment Server
[08:53:45] - Successful: assigned to (171.67.108.141).
[08:53:45] + News From Folding@Home: Welcome to Folding@Home
[08:53:45] Loaded queue successfully.
[08:53:45] Gpu type=3 species=30.
[08:53:48] - Couldn't send HTTP request to server
[08:53:48] + Could not connect to Work Server
[08:53:48] - Attempt #2  to get work failed, and no other work to do.
Waiting before retry.
[08:54:06] + Attempting to get work packet
[08:54:06] Passkey found
[08:54:06] Gpu type=3 species=30.
[08:54:06] - Connecting to assignment server
[08:54:06] - Couldn't send HTTP request to server
[08:54:06]   (Got status 403)
[08:54:06] + Could not connect to Assignment Server
[08:54:07] - Successful: assigned to (171.67.108.141).
[08:54:07] + News From Folding@Home: Welcome to Folding@Home
[08:54:07] Loaded queue successfully.
[08:54:07] Gpu type=3 species=30.
[08:54:10] - Couldn't send HTTP request to server
[08:54:10] + Could not connect to Work Server
[08:54:10] - Attempt #3  to get work failed, and no other work to do.
Waiting before retry.
[08:54:33] + Attempting to get work packet
[08:54:33] Passkey found
[08:54:33] Gpu type=3 species=30.
[08:54:33] - Connecting to assignment server
[08:54:33] - Couldn't send HTTP request to server
[08:54:33]   (Got status 403)
[08:54:33] + Could not connect to Assignment Server
[08:54:33] - Successful: assigned to (171.67.108.141).
[08:54:33] + News From Folding@Home: Welcome to Folding@Home
[08:54:34] Loaded queue successfully.
[08:54:34] Gpu type=3 species=30.
[08:54:36] - Couldn't send HTTP request to server
[08:54:36] + Could not connect to Work Server
[08:54:36] - Attempt #4  to get work failed, and no other work to do.
Waiting before retry.

Folding@Home Client Shutdown.


--- Opening Log file [February 21 08:54:47 UTC] 


# Windows GPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30r1

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: D:\Back-up-August2011crash\Folding@home-gpu
Executable: D:\Back-up-August2011crash\Folding@home-gpu\Folding@home-Win32-GPU.exe
Arguments: -config 

[08:54:47] - Ask before connecting: No
[08:54:47] - User name: Overvoltage (Team 11314)
[08:54:47] - User ID: 1CEAE09A7D80A5A1
[08:54:47] - Machine ID: 2
[08:54:47] 
[08:54:47] Gpu type=3 species=30.
[08:54:47] Configuring Folding@Home...


[08:56:02] - Ask before connecting: No
[08:56:02] - User name: Overvoltage (Team 11314)
[08:56:02] - User ID: 1CEAE09A7D80A5A1
[08:56:02] - Machine ID: 2
[08:56:02] 
[08:56:02] Loaded queue successfully.
[08:56:02] - Preparing to get new work unit...
[08:56:02] Cleaning up work directory
[08:56:02] + Attempting to get work packet
[08:56:02] Passkey found
[08:56:02] Gpu type=3 species=30.
[08:56:02] - Connecting to assignment server
[08:56:02] - Couldn't send HTTP request to server
[08:56:02]   (Got status 403)
[08:56:02] + Could not connect to Assignment Server
[08:56:03] - Successful: assigned to (171.67.108.141).
[08:56:03] + News From Folding@Home: Welcome to Folding@Home
[08:56:03] Loaded queue successfully.
[08:56:03] Gpu type=3 species=30.
[08:56:06] - Couldn't send HTTP request to server
[08:56:06] + Could not connect to Work Server
[08:56:06] - Attempt #1  to get work failed, and no other work to do.
Waiting before retry.
[08:56:14] + Attempting to get work packet
[08:56:14] Passkey found
[08:56:14] Gpu type=3 species=30.
[08:56:14] - Connecting to assignment server
[08:56:14] - Couldn't send HTTP request to server
[08:56:14]   (Got status 403)
[08:56:14] + Could not connect to Assignment Server
[08:56:15] - Successful: assigned to (171.67.108.141).
[08:56:15] + News From Folding@Home: Welcome to Folding@Home
[08:56:15] Loaded queue successfully.
[08:56:15] Gpu type=3 species=30.
[08:56:18] - Couldn't send HTTP request to server
[08:56:18] + Could not connect to Work Server
[08:56:18] - Attempt #2  to get work failed, and no other work to do.
Waiting before retry.
[08:56:34] + Attempting to get work packet
[08:56:34] Passkey found
[08:56:34] Gpu type=3 species=30.
[08:56:34] - Connecting to assignment server
[08:56:34] - Couldn't send HTTP request to server
[08:56:34]   (Got status 403)
[08:56:34] + Could not connect to Assignment Server
[08:56:35] - Successful: assigned to (171.67.108.141).
[08:56:35] + News From Folding@Home: Welcome to Folding@Home
[08:56:35] Loaded queue successfully.
[08:56:35] Gpu type=3 species=30.
[08:56:38] - Couldn't send HTTP request to server
[08:56:38] + Could not connect to Work Server
[08:56:38] - Attempt #3  to get work failed, and no other work to do.
Waiting before retry.
[08:57:02] + Attempting to get work packet
[08:57:02] Passkey found
[08:57:02] Gpu type=3 species=30.
[08:57:02] - Connecting to assignment server
[08:57:02] - Couldn't send HTTP request to server
[08:57:02]   (Got status 403)
[08:57:02] + Could not connect to Assignment Server
[08:57:02] - Successful: assigned to (171.67.108.141).
[08:57:02] + News From Folding@Home: Welcome to Folding@Home
[08:57:03] Loaded queue successfully.
[08:57:03] Gpu type=3 species=30.
[08:57:05] - Couldn't send HTTP request to server
[08:57:05] + Could not connect to Work Server
[08:57:05] - Attempt #4  to get work failed, and no other work to do.
Waiting before retry.
[08:57:53] + Attempting to get work packet
[08:57:53] Passkey found
[08:57:53] Gpu type=3 species=30.
[08:57:53] - Connecting to assignment server
[08:57:53] - Couldn't send HTTP request to server
[08:57:53]   (Got status 403)
[08:57:53] + Could not connect to Assignment Server
[08:57:53] - Successful: assigned to (171.67.108.141).
[08:57:53] + News From Folding@Home: Welcome to Folding@Home
[08:57:54] Loaded queue successfully.
[08:57:54] Gpu type=3 species=30.
[08:57:57] - Couldn't send HTTP request to server
[08:57:57] + Could not connect to Work Server
[08:57:57] - Attempt #5  to get work failed, and no other work to do.
Waiting before retry.
[08:59:28] + Attempting to get work packet
[08:59:28] Passkey found
[08:59:28] Gpu type=3 species=30.
[08:59:28] - Connecting to assignment server
[08:59:28] - Couldn't send HTTP request to server
[08:59:28]   (Got status 403)
[08:59:28] + Could not connect to Assignment Server
[08:59:28] - Successful: assigned to (171.67.108.141).
[08:59:28] + News From Folding@Home: Welcome to Folding@Home
[08:59:28] Loaded queue successfully.
[08:59:28] Gpu type=3 species=30.
[08:59:31] - Couldn't send HTTP request to server
[08:59:31] + Could not connect to Work Server
[08:59:31] - Attempt #6  to get work failed, and no other work to do.
Waiting before retry.
[09:02:19] + Attempting to get work packet
[09:02:19] Passkey found
[09:02:19] Gpu type=3 species=30.
[09:02:19] - Connecting to assignment server
[09:02:20] - Couldn't send HTTP request to server
[09:02:20]   (Got status 403)
[09:02:20] + Could not connect to Assignment Server
[09:02:20] - Successful: assigned to (171.67.108.141).
[09:02:20] + News From Folding@Home: Welcome to Folding@Home
[09:02:20] Loaded queue successfully.
[09:02:20] Gpu type=3 species=30.
[09:02:23] - Couldn't send HTTP request to server
[09:02:23] + Could not connect to Work Server
[09:02:23] - Attempt #7  to get work failed, and no other work to do.
Waiting before retry.
[09:07:46] + Attempting to get work packet
[09:07:46] Passkey found
[09:07:46] Gpu type=3 species=30.
[09:07:46] - Connecting to assignment server
[09:07:47] - Couldn't send HTTP request to server
[09:07:47]   (Got status 403)
[09:07:47] + Could not connect to Assignment Server
[09:07:48] - Successful: assigned to (171.67.108.141).
[09:07:48] + News From Folding@Home: Welcome to Folding@Home
[09:07:48] Loaded queue successfully.
[09:07:48] Gpu type=3 species=30.
[09:07:51] - Couldn't send HTTP request to server
[09:07:51] + Could not connect to Work Server
[09:07:51] - Attempt #8  to get work failed, and no other work to do.
Waiting before retry.
[09:18:33] + Attempting to get work packet
[09:18:33] Passkey found
[09:18:33] Gpu type=3 species=30.
[09:18:33] - Connecting to assignment server
[09:18:34] - Couldn't send HTTP request to server
[09:18:34]   (Got status 403)
[09:18:34] + Could not connect to Assignment Server
[09:18:34] - Successful: assigned to (171.67.108.141).
[09:18:34] + News From Folding@Home: Welcome to Folding@Home
[09:18:35] Loaded queue successfully.
[09:18:35] Gpu type=3 species=30.
[09:18:37] - Couldn't send HTTP request to server
[09:18:37] + Could not connect to Work Server
[09:18:37] - Attempt #9  to get work failed, and no other work to do.
Waiting before retry.
[09:40:07] + Attempting to get work packet
[09:40:07] Passkey found
[09:40:07] Gpu type=3 species=30.
[09:40:07] - Connecting to assignment server
[09:40:09] - Couldn't send HTTP request to server
[09:40:09]   (Got status 403)
[09:40:09] + Could not connect to Assignment Server
[09:40:10] - Successful: assigned to (171.67.108.141).
[09:40:10] + News From Folding@Home: Welcome to Folding@Home
[09:40:10] Loaded queue successfully.
[09:40:10] Gpu type=3 species=30.
[09:40:13] - Couldn't send HTTP request to server
[09:40:13] + Could not connect to Work Server
[09:40:13] - Attempt #10  to get work failed, and no other work to do.
Waiting before retry.
[10:22:53] + Attempting to get work packet
[10:22:53] Passkey found
[10:22:53] Gpu type=3 species=30.
[10:22:53] - Connecting to assignment server
[10:22:54] - Couldn't send HTTP request to server
[10:22:54]   (Got status 403)
[10:22:54] + Could not connect to Assignment Server
[10:22:54] - Successful: assigned to (171.67.108.141).
[10:22:54] + News From Folding@Home: Welcome to Folding@Home
[10:22:54] Loaded queue successfully.
[10:22:54] Gpu type=3 species=30.
[10:22:57] - Couldn't send HTTP request to server
[10:22:57] + Could not connect to Work Server
[10:22:57] - Attempt #11  to get work failed, and no other work to do.
Waiting before retry.
[11:11:00] + Attempting to get work packet
[11:11:00] Passkey found
[11:11:00] Gpu type=3 species=30.
[11:11:00] - Connecting to assignment server
[11:11:01] - Couldn't send HTTP request to server
[11:11:01]   (Got status 403)
[11:11:01] + Could not connect to Assignment Server
[11:11:02] - Successful: assigned to (171.67.108.141).
[11:11:02] + News From Folding@Home: Welcome to Folding@Home
[11:11:02] Loaded queue successfully.
[11:11:02] Gpu type=3 species=30.
[11:11:05] - Couldn't send HTTP request to server
[11:11:05] + Could not connect to Work Server
[11:11:05] - Attempt #12  to get work failed, and no other work to do.
Waiting before retry.
[11:59:20] + Attempting to get work packet
[11:59:20] Passkey found
[11:59:20] Gpu type=3 species=30.
[11:59:20] - Connecting to assignment server
[11:59:21] - Couldn't send HTTP request to server
[11:59:21]   (Got status 403)
[11:59:21] + Could not connect to Assignment Server
[11:59:22] - Successful: assigned to (171.67.108.141).
[11:59:22] + News From Folding@Home: Welcome to Folding@Home
[11:59:22] Loaded queue successfully.
[11:59:22] Gpu type=3 species=30.
[11:59:25] - Couldn't send HTTP request to server
[11:59:25] + Could not connect to Work Server
[11:59:25] - Attempt #13  to get work failed, and no other work to do.
Waiting before retry.
[12:47:26] + Attempting to get work packet
[12:47:26] Passkey found
[12:47:26] Gpu type=3 species=30.
[12:47:26] - Connecting to assignment server
[12:47:28] - Couldn't send HTTP request to server
[12:47:28]   (Got status 403)
[12:47:28] + Could not connect to Assignment Server
[12:47:28] - Successful: assigned to (171.67.108.141).
[12:47:28] + News From Folding@Home: Welcome to Folding@Home
[12:47:28] Loaded queue successfully.
[12:47:28] Gpu type=3 species=30.
[12:47:31] - Couldn't send HTTP request to server
[12:47:31] + Could not connect to Work Server
[12:47:31] - Attempt #14  to get work failed, and no other work to do.
Waiting before retry.
[13:35:36] + Attempting to get work packet
[13:35:36] Passkey found
[13:35:36] Gpu type=3 species=30.
[13:35:36] - Connecting to assignment server
[13:35:38] - Couldn't send HTTP request to server
[13:35:38]   (Got status 403)
[13:35:38] + Could not connect to Assignment Server
[13:35:38] - Successful: assigned to (171.67.108.141).
[13:35:38] + News From Folding@Home: Welcome to Folding@Home
[13:35:38] Loaded queue successfully.
[13:35:38] Gpu type=3 species=30.
[13:35:41] - Couldn't send HTTP request to server
[13:35:41] + Could not connect to Work Server
[13:35:41] - Attempt #15  to get work failed, and no other work to do.
Waiting before retry.
[14:23:50] + Attempting to get work packet
[14:23:50] Passkey found
[14:23:50] Gpu type=3 species=30.
[14:23:50] - Connecting to assignment server
[14:23:50] - Couldn't send HTTP request to server
[14:23:50]   (Got status 403)
[14:23:50] + Could not connect to Assignment Server
[14:23:51] - Successful: assigned to (171.67.108.141).
[14:23:51] + News From Folding@Home: Welcome to Folding@Home
[14:23:51] Loaded queue successfully.
[14:23:51] Gpu type=3 species=30.
[14:23:54] - Couldn't send HTTP request to server
[14:23:54] + Could not connect to Work Server
[14:23:54] - Attempt #16  to get work failed, and no other work to do.
Waiting before retry.

Folding@Home Client Shutdown.


--- Opening Log file [February 21 15:04:20 UTC] 


# Windows GPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30r1

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: D:\Back-up-August2011crash\Folding@home-gpu
Executable: D:\Back-up-August2011crash\Folding@home-gpu\Folding@home-Win32-GPU.exe


[15:04:20] - Ask before connecting: No
[15:04:20] - User name: Overvoltage (Team 11314)
[15:04:20] - User ID: 1CEAE09A7D80A5A1
[15:04:20] - Machine ID: 2
[15:04:20] 
[15:04:20] Gpu type=3 species=30.
[15:04:20] Loaded queue successfully.
[15:04:20] - Preparing to get new work unit...
[15:04:20] Cleaning up work directory
[15:04:20] + Attempting to get work packet
[15:04:20] Passkey found
[15:04:20] Gpu type=3 species=30.
[15:04:20] - Connecting to assignment server
[15:04:20] - Couldn't send HTTP request to server
[15:04:20]   (Got status 403)
[15:04:20] + Could not connect to Assignment Server
[15:04:20] - Successful: assigned to (171.67.108.141).
[15:04:20] + News From Folding@Home: Welcome to Folding@Home
[15:04:21] Loaded queue successfully.
[15:04:21] Gpu type=3 species=30.
[15:04:23] - Couldn't send HTTP request to server
[15:04:32] + Could not connect to Work Server
[15:04:32] - Attempt #1  to get work failed, and no other work to do.
Waiting before retry.
[15:04:39] + Attempting to get work packet
[15:04:39] Passkey found
[15:04:39] Gpu type=3 species=30.
[15:04:39] - Connecting to assignment server
[15:04:40] - Couldn't send HTTP request to server
[15:04:40]   (Got status 403)
[15:04:40] + Could not connect to Assignment Server
[15:04:40] - Successful: assigned to (171.67.108.141).
[15:04:40] + News From Folding@Home: Welcome to Folding@Home
[15:04:40] Loaded queue successfully.
[15:04:40] Gpu type=3 species=30.
[15:04:43] - Couldn't send HTTP request to server
[15:04:43] + Could not connect to Work Server
[15:04:43] - Attempt #2  to get work failed, and no other work to do.
Waiting before retry.

Folding@Home Client Shutdown.


--- Opening Log file [February 21 15:07:13 UTC] 


# Windows GPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.41r2

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: D:\Back-up-August2011crash\Folding@home-gpu
Executable: D:\Back-up-August2011crash\Folding@home-gpu\Folding@home-Win32-GPU.exe


[15:07:13] - Ask before connecting: No
[15:07:13] - User name: Overvoltage (Team 11314)
[15:07:13] - User ID: 1CEAE09A7D80A5A1
[15:07:13] - Machine ID: 2
[15:07:13] 
[15:07:13] Gpu type=3 species=20.
[15:07:13] Loaded queue successfully.
[15:07:13] - Preparing to get new work unit...
[15:07:13] Cleaning up work directory
[15:07:13] + Attempting to get work packet
[15:07:13] Passkey found
[15:07:13] Gpu type=3 species=20.
[15:07:13] - Connecting to assignment server
[15:07:13] - Couldn't send HTTP request to server
[15:07:13]   (Got status 403)
[15:07:13] + Could not connect to Assignment Server
[15:07:14] - Successful: assigned to (171.67.108.141).
[15:07:14] + News From Folding@Home: Welcome to Folding@Home
[15:07:14] Loaded queue successfully.
[15:07:14] Gpu type=3 species=20.
[15:07:17] - Couldn't send HTTP request to server
[15:07:17] + Could not connect to Work Server
[15:07:17] - Attempt #1  to get work failed, and no other work to do.
Waiting before retry.
[15:07:27] + Attempting to get work packet
[15:07:27] Passkey found
[15:07:27] Gpu type=3 species=20.
[15:07:27] - Connecting to assignment server
[15:07:27] - Couldn't send HTTP request to server
[15:07:27]   (Got status 403)
[15:07:27] + Could not connect to Assignment Server
[15:07:27] - Successful: assigned to (171.67.108.141).
[15:07:27] + News From Folding@Home: Welcome to Folding@Home
[15:07:28] Loaded queue successfully.
[15:07:28] Gpu type=3 species=20.
[15:07:30] - Couldn't send HTTP request to server
[15:07:30] + Could not connect to Work Server
[15:07:30] - Attempt #2  to get work failed, and no other work to do.
Waiting before retry.

Folding@Home Client Shutdown.


--- Opening Log file [February 21 15:07:41 UTC] 


# Windows GPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.41r2

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: D:\Back-up-August2011crash\Folding@home-gpu
Executable: D:\Back-up-August2011crash\Folding@home-gpu\Folding@home-Win32-GPU.exe
Arguments: -config 

[15:07:41] - Ask before connecting: No
[15:07:41] - User name: Overvoltage (Team 11314)
[15:07:41] - User ID: 1CEAE09A7D80A5A1
[15:07:41] - Machine ID: 2
[15:07:41] 
[15:07:41] Gpu type=3 species=20.
[15:07:41] Configuring Folding@Home...


[15:08:05] - Ask before connecting: No
[15:08:05] - User name: Overvoltage (Team 11314)
[15:08:05] - User ID: 1CEAE09A7D80A5A1
[15:08:05] - Machine ID: 2
[15:08:05] 
[15:08:06] Loaded queue successfully.
[15:08:06] - Preparing to get new work unit...
[15:08:06] Cleaning up work directory
[15:08:06] + Attempting to get work packet
[15:08:06] Passkey found
[15:08:06] Gpu type=3 species=20.
[15:08:06] - Connecting to assignment server
[15:08:06] - Couldn't send HTTP request to server
[15:08:06]   (Got status 403)
[15:08:06] + Could not connect to Assignment Server
[15:08:06] - Successful: assigned to (171.67.108.141).
[15:08:06] + News From Folding@Home: Welcome to Folding@Home
[15:08:06] Loaded queue successfully.
[15:08:06] Gpu type=3 species=20.
[15:08:09] - Couldn't send HTTP request to server
[15:08:09] + Could not connect to Work Server
[15:08:09] - Attempt #1  to get work failed, and no other work to do.
Waiting before retry.
[15:08:14] + Attempting to get work packet
[15:08:14] Passkey found
[15:08:14] Gpu type=3 species=20.
[15:08:14] - Connecting to assignment server
[15:08:14] - Couldn't send HTTP request to server
[15:08:14]   (Got status 403)
[15:08:14] + Could not connect to Assignment Server
[15:08:15] - Successful: assigned to (171.67.108.141).
[15:08:15] + News From Folding@Home: Welcome to Folding@Home
[15:08:15] Loaded queue successfully.
[15:08:15] Gpu type=3 species=20.
[15:08:18] - Couldn't send HTTP request to server
[15:08:18] + Could not connect to Work Server
[15:08:18] - Attempt #2  to get work failed, and no other work to do.
Waiting before retry.
[15:08:29] + Attempting to get work packet
[15:08:29] Passkey found
[15:08:29] Gpu type=3 species=20.
[15:08:29] - Connecting to assignment server
[15:08:29] - Couldn't send HTTP request to server
[15:08:29]   (Got status 403)
[15:08:29] + Could not connect to Assignment Server
[15:08:29] - Successful: assigned to (171.67.108.141).
[15:08:29] + News From Folding@Home: Welcome to Folding@Home
[15:08:29] Loaded queue successfully.
[15:08:29] Gpu type=3 species=20.
[15:08:32] - Couldn't send HTTP request to server
[15:08:32] + Could not connect to Work Server
[15:08:32] - Attempt #3  to get work failed, and no other work to do.
Waiting before retry.
[15:09:05] + Attempting to get work packet
[15:09:05] Passkey found
[15:09:05] Gpu type=3 species=20.
[15:09:05] - Connecting to assignment server
[15:09:05] - Couldn't send HTTP request to server
[15:09:05]   (Got status 403)
[15:09:05] + Could not connect to Assignment Server
[15:09:06] - Successful: assigned to (171.67.108.141).
[15:09:06] + News From Folding@Home: Welcome to Folding@Home
[15:09:06] Loaded queue successfully.
[15:09:06] Gpu type=3 species=20.
[15:09:09] - Couldn't send HTTP request to server
[15:09:09] + Could not connect to Work Server
[15:09:09] - Attempt #4  to get work failed, and no other work to do.
Waiting before retry.
[15:09:58] + Attempting to get work packet
[15:09:58] Passkey found
[15:09:58] Gpu type=3 species=20.
[15:09:58] - Connecting to assignment server
[15:09:58] - Couldn't send HTTP request to server
[15:09:58]   (Got status 403)
[15:09:58] + Could not connect to Assignment Server
[15:09:59] - Successful: assigned to (171.67.108.141).
[15:09:59] + News From Folding@Home: Welcome to Folding@Home
[15:09:59] Loaded queue successfully.
[15:09:59] Gpu type=3 species=20.
[15:10:02] - Couldn't send HTTP request to server
[15:10:02] + Could not connect to Work Server
[15:10:02] - Attempt #5  to get work failed, and no other work to do.
Waiting before retry.
[15:11:35] + Attempting to get work packet
[15:11:35] Passkey found
[15:11:35] Gpu type=3 species=20.
[15:11:35] - Connecting to assignment server
[15:11:35] - Couldn't send HTTP request to server
[15:11:35]   (Got status 403)
[15:11:35] + Could not connect to Assignment Server
[15:11:36] - Successful: assigned to (171.67.108.141).
[15:11:36] + News From Folding@Home: Welcome to Folding@Home
[15:11:36] Loaded queue successfully.
[15:11:36] Gpu type=3 species=20.
[15:11:39] - Couldn't send HTTP request to server
[15:11:39] + Could not connect to Work Server
[15:11:39] - Attempt #6  to get work failed, and no other work to do.
Waiting before retry.
[15:14:28] + Attempting to get work packet
[15:14:28] Passkey found
[15:14:28] Gpu type=3 species=20.
[15:14:28] - Connecting to assignment server
[15:14:28] - Couldn't send HTTP request to server
[15:14:28]   (Got status 403)
[15:14:29] + Could not connect to Assignment Server
[15:14:29] - Successful: assigned to (171.67.108.141).
[15:14:29] + News From Folding@Home: Welcome to Folding@Home
[15:14:29] Loaded queue successfully.
[15:14:29] Gpu type=3 species=20.
[15:14:32] - Couldn't send HTTP request to server
[15:14:32] + Could not connect to Work Server
[15:14:32] - Attempt #7  to get work failed, and no other work to do.
Waiting before retry.
[15:20:01] + Attempting to get work packet
[15:20:01] Passkey found
[15:20:01] Gpu type=3 species=20.
[15:20:01] - Connecting to assignment server
[15:20:02] - Couldn't send HTTP request to server
[15:20:02]   (Got status 403)
[15:20:02] + Could not connect to Assignment Server
[15:20:02] - Successful: assigned to (171.67.108.141).
[15:20:02] + News From Folding@Home: Welcome to Folding@Home
[15:20:02] Loaded queue successfully.
[15:20:02] Gpu type=3 species=20.
[15:20:05] - Couldn't send HTTP request to server
[15:20:05] + Could not connect to Work Server
[15:20:05] - Attempt #8  to get work failed, and no other work to do.
Waiting before retry.

Folding@Home Client Shutdown.


--- Opening Log file [February 21 15:27:00 UTC] 


# Windows GPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.41r2

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: D:\Back-up-August2011crash\Folding@home-gpu
Executable: D:\Back-up-August2011crash\Folding@home-gpu\Folding@home-Win32-GPU.exe


[15:27:00] - Ask before connecting: No
[15:27:00] - User name: Overvoltage (Team 11314)
[15:27:00] - User ID: 1CEAE09A7D80A5A1
[15:27:00] - Machine ID: 2
[15:27:00] 
[15:27:00] Gpu type=3 species=20.
[15:27:00] Loaded queue successfully.
[15:27:00] - Preparing to get new work unit...
[15:27:00] Cleaning up work directory
[15:27:00] + Attempting to get work packet
[15:27:00] Passkey found
[15:27:00] Gpu type=3 species=20.
[15:27:00] - Connecting to assignment server
[15:27:00] - Couldn't send HTTP request to server
[15:27:00]   (Got status 403)
[15:27:00] + Could not connect to Assignment Server
[15:27:01] - Successful: assigned to (171.67.108.141).
[15:27:01] + News From Folding@Home: Welcome to Folding@Home
[15:27:01] Loaded queue successfully.
[15:27:01] Gpu type=3 species=20.
[15:27:04] - Couldn't send HTTP request to server
[15:27:04] + Could not connect to Work Server
[15:27:04] - Attempt #1  to get work failed, and no other work to do.
Waiting before retry.

If the question or statement you had was relating to the v.7 window I posted: I just downloaded that thing about 4 hours ago assuming the 6.41r2 and 6.34 clients were out of date or being phased out ( hence the I hate change title thread earlier) after reading back through the posts on the forum and seeing it mentioned several times. I have in the past used a client for so long that it became obsolete and was told to update it on this site, I decided to take a preemptive approach and make sure that wasn't my issue this time.

_MtM_ · 02-21-2012, 05:29 PM

You said you been running them over the past week, they are only released to public last night so I wondered if you ran the beta team flag. And yes, running that flag means no help from me, and should mean the same for others. BUT as I pointed out, instead of just me/us/everyone else, you suddenly get a whole subsection of http://foldingforum.org as support, and they will all answer any questions you have and they will listen to any comments you have to make.

Seems you didn't mean you were running them all week.

Also, you could have just said so, I would have believed you, I only said 'post the logs' if you admitted running beta flag, for the next time so I knew for sure the issue discussed isn't related. I'm not trying to be a ****, but I been corrected today already once for discussing things which I shouldn't in public forum and that makes me watch myself more closely.

And you have to admit, your statement would lead anyone to believe you were running beta work units. The connection problems only make it more reasonable as you said you been running these units prior.

I think you didn't understand the exact range we were taking about, linked earlier in the thread, and you probably just ment gpu projects in general and not the new projects mentioned here as gone out to f@h -> http://foldingforum.org/viewtopic.php?p=208672#p208672

So just be clear: beta team are people who signed up at the support forum and opt in to run beta work units. Sometimes a project is misconfigured and general f@h get's them, on exception. Generally, it's well maintained and executed, and it solves a lot of problems by running the work units in a smaller group of people who have experience with the client and are able to take steps to reproduce something or offer detailed information. It's a system without rewards, beta team does not earn you more points ( by design, sometimes projects might be benchmarked wrong but that's also a task of beta team: correcting benchmark values, and often the beta wu's are benched to low according to the people

). Without rewards other then being able to help and contribute to the project.

Some people run beta work units because at that moment in time they would give higher points per day, without ever giving feedback to the developers in other cases. That is why support for beta team work units is never given outside of beta team forum. Now I knew this project was not in beta but you said you been running them for over a week. That made me suspicious and is the reason I posted what I did.

Maniac · 02-21-2012, 06:14 PM

Quote:

Originally Posted by _MtM_

Not one of you having issues with more desktop lag?

Edit: you are talking about these right? -> http://foldingforum.org/viewtopic.php?p=208672#p208672

Nope, everything is running normally here, with Aero on. With Aero off I get lag with even the old units.

Overvoltage · 02-21-2012, 06:18 PM

I think the confusion is from my lack of quotations. I was answering in reference to Maniacs post about the Units pulling higher power draws on the GPU. I've been running units like this since 1-24-2012, and even made a post referencing the increase in power draw the Core a15 units pull.

Maniac · 02-22-2012, 04:46 AM

Quote:

Originally Posted by Overvoltage

I think the confusion is from my lack of quotations. I was answering in reference to Maniacs post about the Units pulling higher power draws on the GPU. I've been running units like this since 1-24-2012, and even made a post referencing the increase in power draw the Core a15 units pull.

The power draw from these is way higher than anything we've had even during the past week. I'm starting to think they are going to need to back off a bit. Come summer I may have to underclock my card due to heat...

Also, my UPS started beeping again today. I turned off my TV (which is not on the UPS) which raised the input voltage on the circuit high enough to turn the beeping off, but I may have to back off my CPU overclock if this keeps up....

_MtM_ · 02-22-2012, 05:57 AM

How about this one -> http://foldingforum.org/viewtopic.php?f=67&t=20880

Weak psu, but never seemed to have had issues with older wu's.

Come these -> poof!

Maniac · 02-22-2012, 11:27 AM

Quote:

Originally Posted by _MtM_

How about this one -> http://foldingforum.org/viewtopic.php?f=67&t=20880

Weak psu, but never seemed to have had issues with older wu's.

Come these -> poof!

The power draw on these is probably equivalent to furmark...

jmossman · 02-22-2012, 01:22 PM

Would be interesting to see what both 570's of mine would do. I never actually measured power draw on a single card, but did on both on the old WUs. I have a feeling it would draw a good 100 more watts for 2 cards. Lucky for me I have a couple hundred watts headroom to work with.

Overvoltage · 02-22-2012, 01:53 PM

Quote:

Originally Posted by Maniac

The power draw from these is way higher than anything we've had even during the past week. I'm starting to think they are going to need to back off a bit. Come summer I may have to underclock my card due to heat...

Also, my UPS started beeping again today. I turned off my TV (which is not on the UPS) which raised the input voltage on the circuit high enough to turn the beeping off, but I may have to back off my CPU overclock if this keeps up....

What are you running your 480 at for these units Maniac? The Tim on my card is over a year old and it was the bargain-basement white stuff I put on so it may be time to apply a fresh batch.
I use MSI afterburner to set the speeds and voltages. 12V rail under load is @ 12.08v
When I'm away from the PC I run
.963v core (Droops to .92v in GPU-Z under load)
700 on the Core
1600 on the memory ( no real performance gains running it faster )
Fan is set to 82% @ 3870rpm
Temp holds a steady 89C in a 77F, 25C room.

When I'm at the PC It runs at
1.013v core (Droops to.963 in GPU-z under load)
750 on the core
1600 on the memory
Fan is set to 92% @ 4740rpm
Temp holds at 94C in 77F , 25C room.

Gpu-z reports two core temps for the card. I use the higher temp as a card measurement. I quote the droop voltages under load as they are reported in gpu-z because Msi only reports what you set it to, not what is reaching the chip.

I see 800core in your signature, but I've never reached that under any massive loads like a bench or these sort of folding units. Throw some numbers out as I'd like to know what others are doing with these units. I've been running the heavier load units for a while and these were my stable low voltage settings for each speed keeping heat at what I feel to be a reasonable level.

Quick addition, I'm using the 295.51 drivers. Received a good performance boost in my main games and it doesn't have the issue of clocks getting stuck at low power state if you terminate a GPU unit midway.

Maniac · 02-22-2012, 05:26 PM

Running stock cooler and TIM.

12V under load is 11.81V
1.013V (0.965V @ load)
700 core
1850 memory

72F room
82C @ 100% fan (5619 RPM), sometimes drops to ~80C which runs about 97% fan.
I'm not really comfortable with temps any higher than that. I modified my fan profile via low level controls in rivatuner (less cpu intensive than using afterburner).

800 was the speed I used to run at, I've only run that for benching. I was running at 750 core til I started getting these units.

I am using 295.51 drivers as well, but the 295.73's just came out (dl'ed but not installed).

Also, I've noticed I can't watch videos well while running these units, and I'm using software decoders (ffdshow). I had to quit F@H and restart it after watching.

_MtM_ · 02-22-2012, 05:57 PM

There is no one here with 4 fermi's in a single rig right? Would be interesting to see the power draw differences between these units and the older one's.

And ahh finally the first lag comment ( was waiting on it ). Still not as bad as some people who's desktop experience went down the drain ( delays in typing and text appearing are really annoying I know from experience ).

Copyright ©2000 - 2011, Jelsoft Enterprises Ltd.	Powered by vBulletin
Copyright ©2000 - 2011, EXTREME Overclocking	Acceptable Usage Policy (AUP) - Disclaimer of Liability - Privacy Policy - Top